USB
Showing 1–12 of 26 results
-
JAV-DP-HDMI
Read moreJAV-DP-HDMI
- Connect DisplayPort source to HDMI display
- Supports resolutions up to 4K x 2K @ 30Hz, 1080p @ 120Hz and 3D
- HDMI 1.4b and HDCP 1.3 compliant
- VESA Dual-Mode DisplayPort 1.2a compliant
- Supports up to 8-channel LPCM and HBR audio up to 192Khz
- Plug-N-Play
-
HT-DSCV3-RX-V2
Read moreHT-DSCV3-RX-V2
The DSCV3 family includes the POH (Power over HDBT) module, which requires the extenders to be powered on only one side (TX or RX). The transmitter’s built-in PSE module, when connected to local power, provides 60W charging to the host device via USB-C. With the built-in control pass-through, users can control the source from the display’s location or can control the display from the source’s location. And, with their small form factor, the extenders are easy to install in many locations.
**NOTE** The DisplayLink driver is needed for the laptop to send video to the HT-DSCV3-RX-V2. For most Windows laptops, the DisplayLink driver is typically already installed, but for laptops operating on macOS, ChromeOS, Linux, or Android, the driver must be installed. The following link will take you to the latest DisplayLink drivers.
DisplayLink Downloads: Click Here
-
HT-DSCV3-TX-WP
Read moreHT-DSCV3-TX-WP
The DSCV3 family is the next generation of USB 3.2 extension which supports USB 3.2 Gen 1×1 standard. These extenders support 5 Gbit/s data transfer rate and are backwards compatible with USB 3.0, USB 2.0, and USB 1.1 specifications.
This transmitter can be paired with the HT-DSCV3-RX, HT-DSCV3-RX-WP, and HT-DSCV3-RX-V2.
-
HT-DSCV3-RX-WP
Read moreHT-DSCV3-RX-WP
The Discovery 3 Series Wallplate Receiver is a sleek, in-wall USB 3.2 extender that delivers high-speed 5 Gbit/s data transfer, 90W USB-C charging, and dual HDMI video output (RX-V2 model)—all over a single Cat6a/7 cable up to 90m. With Power over HDBaseT (PoH), only one side needs power, simplifying installation and reducing clutter. Ideal for conference rooms, classrooms, and corporate AV setups, this compact yet powerful solution ensures seamless connectivity and effortless integration.
This receiver can be paired with the HT-DSCV3-TX (requires a separate power supply for the -TX). It can also be paired with HT-DSCV3-TX-WP, however each wall plate will need a 12V 1A power supply connected on the rear of each wall plate.
-
HT-DSCV3-TX
Read moreHT-DSCV3-TX
The HT-DSCV3-TX is a cutting-edge USB 3.2 extender designed for seamless data transfer and power delivery, offering unparalleled versatility and performance. Part of the DSCV3 family, this device supports the USB 3.2 Gen 1×1 standard, achieving blazing-fast 5 Gbit/s data transfer rates while maintaining backward compatibility with USB 3.0, USB 2.0, and USB 1.1 specifications. This ensures smooth integration into both modern and legacy setups.
-
HT-DSCV3-RX
Read moreHT-DSCV3-RX
The HT-DSCV3-RX is part of the DSCV3 series, a cutting-edge solution for USB 3.2 extension, designed to meet the demanding needs of modern connectivity. Supporting the USB 3.2 Gen 1×1 standard, this receiver offers a high-speed 5 Gbit/s data transfer rate while maintaining backwards compatibility with USB 3.0, USB 2.0, and USB 1.1 standards. This versatility ensures seamless integration with a wide range of devices and systems.
The HT-DSCV3-RX is perfect for professionals seeking robust performance and ease of use, whether for AV installations, corporate environments, or sophisticated control systems.
This receiver can be paired with the HT-DSCV3-TX or HT-DSCV3-TX-WP.
-
HT-RANGER2
Read moreHT-RANGER2
The HT-RANGER2 is a high-performance BYOD presentation switcher with wireless presentation capability.
-
HT-SATELLITE-CM-MNT
Read more -
HT-VOYAGER2
Read more -
Discovery Series
Read moreDiscovery Series
Our Discovery Series offers a cost-effective 4K extension with flexible USB and HDMI capabilities for software video conferencing and audio extraction. These kits were designed specifically to address signal extension for multiple participants in classrooms, huddle spaces, or conference rooms. The Discovery series includes an HDBaseT Wall Plate Transmitter, and Receiver kit that pairs natively with soft-codec video conferencing applications such as Zoom, Teams, Skype, WebEx and more. With both US and UK transmitter wallplate options available, Discovery makes collaboration easy and fluid with support for resolutions up to 4K.
Learn more about each product in the series.
DSCV1-70-TX
DSCV2-70-TX-UK
DSCV2-70-TX-US
DSCV-70-RXWant more info? Please submit this form, and a representative from Hall will contact you.
-
HT-ASTRO2-4
Read moreHT-ASTRO2-4
The HT-ASTRO2-4 is a 4-port plug-and-play USB2.0 extender via a single Cat5e/Cat6 cable. This extender hub kit transmits data from a PC to as many as four USB 2.0 peripherals up to 50m/165ft.
-
HT-CALIPSO
Read moreHT-CALIPSO
All-in-one meeting collaboration with ultra-wide angle 4K AI camera, microphone and speaker features, along with wired and wireless screen casting capability.
Showing 1–12 of 26 results
-
JAV-DP-HDMI
Read moreJAV-DP-HDMI
- Connect DisplayPort source to HDMI display
- Supports resolutions up to 4K x 2K @ 30Hz, 1080p @ 120Hz and 3D
- HDMI 1.4b and HDCP 1.3 compliant
- VESA Dual-Mode DisplayPort 1.2a compliant
- Supports up to 8-channel LPCM and HBR audio up to 192Khz
- Plug-N-Play
-
HT-DSCV3-RX-V2
Read moreHT-DSCV3-RX-V2
The DSCV3 family includes the POH (Power over HDBT) module, which requires the extenders to be powered on only one side (TX or RX). The transmitter’s built-in PSE module, when connected to local power, provides 60W charging to the host device via USB-C. With the built-in control pass-through, users can control the source from the display’s location or can control the display from the source’s location. And, with their small form factor, the extenders are easy to install in many locations.
**NOTE** The DisplayLink driver is needed for the laptop to send video to the HT-DSCV3-RX-V2. For most Windows laptops, the DisplayLink driver is typically already installed, but for laptops operating on macOS, ChromeOS, Linux, or Android, the driver must be installed. The following link will take you to the latest DisplayLink drivers.
DisplayLink Downloads: Click Here
-
HT-DSCV3-TX-WP
Read moreHT-DSCV3-TX-WP
The DSCV3 family is the next generation of USB 3.2 extension which supports USB 3.2 Gen 1×1 standard. These extenders support 5 Gbit/s data transfer rate and are backwards compatible with USB 3.0, USB 2.0, and USB 1.1 specifications.
This transmitter can be paired with the HT-DSCV3-RX, HT-DSCV3-RX-WP, and HT-DSCV3-RX-V2.
-
HT-DSCV3-RX-WP
Read moreHT-DSCV3-RX-WP
The Discovery 3 Series Wallplate Receiver is a sleek, in-wall USB 3.2 extender that delivers high-speed 5 Gbit/s data transfer, 90W USB-C charging, and dual HDMI video output (RX-V2 model)—all over a single Cat6a/7 cable up to 90m. With Power over HDBaseT (PoH), only one side needs power, simplifying installation and reducing clutter. Ideal for conference rooms, classrooms, and corporate AV setups, this compact yet powerful solution ensures seamless connectivity and effortless integration.
This receiver can be paired with the HT-DSCV3-TX (requires a separate power supply for the -TX). It can also be paired with HT-DSCV3-TX-WP, however each wall plate will need a 12V 1A power supply connected on the rear of each wall plate.
-
HT-DSCV3-TX
Read moreHT-DSCV3-TX
The HT-DSCV3-TX is a cutting-edge USB 3.2 extender designed for seamless data transfer and power delivery, offering unparalleled versatility and performance. Part of the DSCV3 family, this device supports the USB 3.2 Gen 1×1 standard, achieving blazing-fast 5 Gbit/s data transfer rates while maintaining backward compatibility with USB 3.0, USB 2.0, and USB 1.1 specifications. This ensures smooth integration into both modern and legacy setups.
-
HT-DSCV3-RX
Read moreHT-DSCV3-RX
The HT-DSCV3-RX is part of the DSCV3 series, a cutting-edge solution for USB 3.2 extension, designed to meet the demanding needs of modern connectivity. Supporting the USB 3.2 Gen 1×1 standard, this receiver offers a high-speed 5 Gbit/s data transfer rate while maintaining backwards compatibility with USB 3.0, USB 2.0, and USB 1.1 standards. This versatility ensures seamless integration with a wide range of devices and systems.
The HT-DSCV3-RX is perfect for professionals seeking robust performance and ease of use, whether for AV installations, corporate environments, or sophisticated control systems.
This receiver can be paired with the HT-DSCV3-TX or HT-DSCV3-TX-WP.
-
HT-RANGER2
Read moreHT-RANGER2
The HT-RANGER2 is a high-performance BYOD presentation switcher with wireless presentation capability.
-
HT-SATELLITE-CM-MNT
Read more -
HT-VOYAGER2
Read more -
Discovery Series
Read moreDiscovery Series
Our Discovery Series offers a cost-effective 4K extension with flexible USB and HDMI capabilities for software video conferencing and audio extraction. These kits were designed specifically to address signal extension for multiple participants in classrooms, huddle spaces, or conference rooms. The Discovery series includes an HDBaseT Wall Plate Transmitter, and Receiver kit that pairs natively with soft-codec video conferencing applications such as Zoom, Teams, Skype, WebEx and more. With both US and UK transmitter wallplate options available, Discovery makes collaboration easy and fluid with support for resolutions up to 4K.
Learn more about each product in the series.
DSCV1-70-TX
DSCV2-70-TX-UK
DSCV2-70-TX-US
DSCV-70-RXWant more info? Please submit this form, and a representative from Hall will contact you.
-
HT-ASTRO2-4
Read moreHT-ASTRO2-4
The HT-ASTRO2-4 is a 4-port plug-and-play USB2.0 extender via a single Cat5e/Cat6 cable. This extender hub kit transmits data from a PC to as many as four USB 2.0 peripherals up to 50m/165ft.
-
HT-CALIPSO
Read moreHT-CALIPSO
All-in-one meeting collaboration with ultra-wide angle 4K AI camera, microphone and speaker features, along with wired and wireless screen casting capability.