Adapters / Converter / Tool / Power Supply
Showing 1–12 of 15 results
-
HT-ECLIPSE-RJ45-KIT
Read moreHT-ECLIPSE-RJ45-KIT
Protect your network with the Hall Research Javelin RJ-45 Port Blocker. This compact, easy-to-use device prevents unauthorized access and accidental damage by securing unused network ports—making it a must-have tool for IT professionals and organizations that take security seriously.
-
HT-ECLIPSE-USBA-KIT
Read moreHT-ECLIPSE-USBA-KIT
Keep your information safe on the go with the HT-ELCIPSE-USBA-KIT USB-A Port Blocker—a travel-ready tool that blocks data transfer, stops hackers, and it completely blocks the port from being used and requires a key to be removed.  .
-
HT-ECLIPSE-USBC-KIT
Read moreHT-ECLIPSE-USBC-KIT
Stay secure on the go with the HT-ECLIPSE-USBC-KIT—a compact USB-C data blocker completely blocks the USB-C ports, protecting your device from hackers, malware, and unwanted data leaks. A key is required to remove the port blocker making it a must-have tool for IT professionals and organizations.
-
HT-EM-8K
Read moreHT-EM-8K
The HT-EM-8K is an 8K HDMI EDID emulator that acts as an HDMI monitor by emulating the EDID found in a typical HDMI monitor. Most PCs and laptops require a special handshake from the display before they output video. This handshake involves reading the EDID table from the monitor. The EDID contains information such as native or supported resolutions and video formats. Some older equipment may not support the EDID properly and the end result is that you often cannot get video from your PC to the external display. This emulator helps to solve potential handshake issues. By default the EDID in the HT-EM-8K is pre-programmed with many standard resolutions up to HDMI 2.0. The emulator can also learn an EDID from a monitor, and can also be placed in a mode to support HDMI 2.1.
-
Hive Node Kits
Read moreHive Node Kits
IoT controllers that offer an efficient and compact solution for controlling devices through RS-232, IR, and Relay interfaces via IP. These PoE-powered kits are designed specifically to enhance the capabilities of the Hive Touch control panel and the Hive KP8 control keypad.
- Three Kits: Hive Node Relay, Hive Node RS-232, and Hive Node IR
- Offers control over TCP/IP networks using a single Cat cable
- Equipped with IR, RS-232, and Relay accessories for diverse control
- Web interface for simple setup and POE for easy power
-
GC-VGA-HDU
Read moreGC-VGA-HDU
- Connect a VGA audio/video source to a HDMIâ„¢ monitor
- Male Type A USB connection for Power and Audio
- Supports input resolutions from 800×600 to 1080p
-
SC-HD-2B
Read moreSC-HD-2B
- Any video resolution can be scaled up or down to any other resolution
- Supports UHD / 4K @ 60 Hz with 4:4:4 Color on input and output
- Horizontal and Vertical mirroring (x or y-axis flip)
- Analog and digital audio inputs and outputs
- Advanced scaling for real-time frame rate capture & conversion
- By default scales the output to the native resolution of any connected display
-
GCDP-2HD
Read moreGCDP-2HD
- Provides two HDMI pass-thru connections for wall plates or lecterns
- HDCP 1.4 and 2.0 compatible
- Compact single-gang Decora Plate form factor
- Decora wall plate included
-
GCDP-1HD
Read moreGCDP-1HD
- Provides one HDMI pass-thru connection for wall plates or lecterns
- HDCP 1.4 and 2.0 compatible
- Compact single-gang Decora Plate form factor
- Decora wall plate included
-
EM-HD-NCP
Read moreEM-HD-NCP
- Emulates an HDMI display (sink device) by providing HPD (hot plug detect) and EDID
- Ships with default EDID that has most common resolutions
- Perfect for use with video switches and extenders
- Display emulator for remote desktop access
- Can be programmed with other resolutions (separate programmer needed)
- Works with Mac Mini, CompuLab fit-PC, Intense PC or with any other computer or laptop
-
GC-HD-DP
Read moreGC-HD-DP
- Connect a HDMI video source to a DisplayPort monitor
- Supports resolutions up to 4K x 2K @ 30Hz, 1080p @ 120Hz and 3D
- HDMI 1.4b and HDCP 1.3 compliant
- VESA Dual-Mode DisplayPort 1.2a compliant
- Supports up to 8-channel LPCM and HBR audio up to 192Khz
- Plug-N-Play
-
GC-DP-HD
Read moreGC-DP-HD
- Connect DisplayPort source to HDMI display
- Supports resolutions up to 4K x 2K @ 30Hz, 1080p @ 120Hz and 3D
- HDMI 1.4b and HDCP 1.3 compliant
- VESA Dual-Mode DisplayPort 1.2a compliant
- Supports up to 8-channel LPCM and HBR audio up to 192Khz
- Plug-N-Play
Showing 1–12 of 15 results
-
HT-ECLIPSE-RJ45-KIT
Read moreHT-ECLIPSE-RJ45-KIT
Protect your network with the Hall Research Javelin RJ-45 Port Blocker. This compact, easy-to-use device prevents unauthorized access and accidental damage by securing unused network ports—making it a must-have tool for IT professionals and organizations that take security seriously.
-
HT-ECLIPSE-USBA-KIT
Read moreHT-ECLIPSE-USBA-KIT
Keep your information safe on the go with the HT-ELCIPSE-USBA-KIT USB-A Port Blocker—a travel-ready tool that blocks data transfer, stops hackers, and it completely blocks the port from being used and requires a key to be removed.  .
-
HT-ECLIPSE-USBC-KIT
Read moreHT-ECLIPSE-USBC-KIT
Stay secure on the go with the HT-ECLIPSE-USBC-KIT—a compact USB-C data blocker completely blocks the USB-C ports, protecting your device from hackers, malware, and unwanted data leaks. A key is required to remove the port blocker making it a must-have tool for IT professionals and organizations.
-
HT-EM-8K
Read moreHT-EM-8K
The HT-EM-8K is an 8K HDMI EDID emulator that acts as an HDMI monitor by emulating the EDID found in a typical HDMI monitor. Most PCs and laptops require a special handshake from the display before they output video. This handshake involves reading the EDID table from the monitor. The EDID contains information such as native or supported resolutions and video formats. Some older equipment may not support the EDID properly and the end result is that you often cannot get video from your PC to the external display. This emulator helps to solve potential handshake issues. By default the EDID in the HT-EM-8K is pre-programmed with many standard resolutions up to HDMI 2.0. The emulator can also learn an EDID from a monitor, and can also be placed in a mode to support HDMI 2.1.
-
Hive Node Kits
Read moreHive Node Kits
IoT controllers that offer an efficient and compact solution for controlling devices through RS-232, IR, and Relay interfaces via IP. These PoE-powered kits are designed specifically to enhance the capabilities of the Hive Touch control panel and the Hive KP8 control keypad.
- Three Kits: Hive Node Relay, Hive Node RS-232, and Hive Node IR
- Offers control over TCP/IP networks using a single Cat cable
- Equipped with IR, RS-232, and Relay accessories for diverse control
- Web interface for simple setup and POE for easy power
-
GC-VGA-HDU
Read moreGC-VGA-HDU
- Connect a VGA audio/video source to a HDMIâ„¢ monitor
- Male Type A USB connection for Power and Audio
- Supports input resolutions from 800×600 to 1080p
-
SC-HD-2B
Read moreSC-HD-2B
- Any video resolution can be scaled up or down to any other resolution
- Supports UHD / 4K @ 60 Hz with 4:4:4 Color on input and output
- Horizontal and Vertical mirroring (x or y-axis flip)
- Analog and digital audio inputs and outputs
- Advanced scaling for real-time frame rate capture & conversion
- By default scales the output to the native resolution of any connected display
-
GCDP-2HD
Read moreGCDP-2HD
- Provides two HDMI pass-thru connections for wall plates or lecterns
- HDCP 1.4 and 2.0 compatible
- Compact single-gang Decora Plate form factor
- Decora wall plate included
-
GCDP-1HD
Read moreGCDP-1HD
- Provides one HDMI pass-thru connection for wall plates or lecterns
- HDCP 1.4 and 2.0 compatible
- Compact single-gang Decora Plate form factor
- Decora wall plate included
-
EM-HD-NCP
Read moreEM-HD-NCP
- Emulates an HDMI display (sink device) by providing HPD (hot plug detect) and EDID
- Ships with default EDID that has most common resolutions
- Perfect for use with video switches and extenders
- Display emulator for remote desktop access
- Can be programmed with other resolutions (separate programmer needed)
- Works with Mac Mini, CompuLab fit-PC, Intense PC or with any other computer or laptop
-
GC-HD-DP
Read moreGC-HD-DP
- Connect a HDMI video source to a DisplayPort monitor
- Supports resolutions up to 4K x 2K @ 30Hz, 1080p @ 120Hz and 3D
- HDMI 1.4b and HDCP 1.3 compliant
- VESA Dual-Mode DisplayPort 1.2a compliant
- Supports up to 8-channel LPCM and HBR audio up to 192Khz
- Plug-N-Play
-
GC-DP-HD
Read moreGC-DP-HD
- Connect DisplayPort source to HDMI display
- Supports resolutions up to 4K x 2K @ 30Hz, 1080p @ 120Hz and 3D
- HDMI 1.4b and HDCP 1.3 compliant
- VESA Dual-Mode DisplayPort 1.2a compliant
- Supports up to 8-channel LPCM and HBR audio up to 192Khz
- Plug-N-Play