DSCV-70-RX

HDBaseT 2.0 Receiver with USB and Audio De-embedding

This product is an HDBT 2.0 receiver that is designed to work with an HDBT wall plate transmitter, reliably extending UHD video, multi-channel audio, USB 2.0, RS232 signal and power up to 40m/131ft using a single Cat 5e/6/6a/7 cable. With PSE module built-in, it can supply power to
the transmitter with PD module via a single power supply.

  • Share

Description

It supports USB 2.0 pass-through, providing a solution for users who need remote control of PC resources sources such as keyboard, mouse,  interactive display, or USB streaming devices over distance. The RS232 port allows bi-directional RS232 serial communication and firmware upgrade, the functions can be set via DIP switch.

Features

  • Simple and cost-effective HDBT 2.0 receiver.
  • HDMI 1.4 with [email protected] (chroma sub-sampling 4:2:0 8-bit only) and HDCP 2.2 compliant.
  • Transmits [email protected] (YUV 4:2:0) signal up to 40m/131ft and [email protected] signal up to 70m/230ft via a Cat 6a/7 cable.
  • Transmits [email protected] (YUV 4:2:0) signal up to 35m/115ft and [email protected] signal up to 60m/197ft via a Cat 5e/6 cable.
  • Supports analog audio pass-through from transmitter to receiver.
  • Supports analog audio de-embedding for HDMI output.
  • High-speed USB 2.0 pass-through over HDBT.
  • Provide two high-current USB device ports to connect high-power USB device.
  • Supports bi-directional RS232 serial communication to control a wall plate transmitter when paired with the wall-plate transmitter.
  • Supports firmware upgrade through the RS232 port.
  • Built-in PSE to power remote HDBT Wall plate transmitter with PD module.

Block Diagram

Downloads

Manuals Versions Last Updated
DSCV-70-RX Manual
V1.0.0 JUNE 29, 2022
Spec Sheets Versions Last Updated
DSCV-70-RX Spec Sheet
JULY 15, 2022
Discovery Series Spec Sheets
June 2022 JULY 15, 2022

Copyright © 2022 Hall Technologies - All Rights Reserved.