discontinued
UHBX-SC-WP
HDMI+RS232+IR+PoH UTP ( Dual Gang Wall Plate Sender)
- Extends HDMI or DVI video to 500 ft on just one Cat6
- RS232 and IR extension in both directions with optional add-on
- Supports all HDMI or DVI resolutions including 4K (UHD)
- Wall plate does not need power connection (powered via UTP)
- Power-over-HDBaseT (PoH) meets IEEE 802.3af standard
- Sturdy and compact metal construction
The UHBX-SC-WP is an HDMI on Cat6 (HDBaseT) double gang wall plate Transmitter. The package includes the following:
- UHBX-S-WP Decora® metal insert
- UHCOM-WP Decora® metal insert
- Standard white plastic Decora® face-plate
- Mud-ring for dry wall installation
The UHBX-SC-WP sender module is comprised of the UHBX-S-WP HDMI wall plate transmitter joined to the UHCOM-WP RS232 +IR add-on wall plate. When paired with a compatible receiver ( Hall Research model UHBX-R-PSE ), it can extend HDMI, bi-directional IR, full-duplex RS232, and PoH (power
over HDBaseT) over distances of up to 150 meters (500 feet) using a single Cat6 cable.
UHBX-SC-WP is fully compatible with the following HDBaseT receiver from Hall Research:
- UHBX-R-PSE : Pair Sold as a kit (see UHBX-WPC-P2)
For best results we recommend using Alliance approved cables listed at this site.
For more information about our other HDBaseT extenders please follow the link below to the Product Selection Chart.
- Extends HDMI or DVI video to 500 ft on just one Cat6
- RS232 and IR extension in both directions with optional add-on
- Supports all HDMI or DVI resolutions including 4K (UHD)
- Wall plate does not need power connection (powered via UTP)
- Power-over-HDBaseT (PoH) meets IEEE 802.3af standard
- Sturdy and compact metal construction
- Fully compatible with HDBaseT standard
- Includes Mud-Ring for easy installation (no electrical box needed)
- RS232 supports baud rates to 115K
- IR extension meets all standards regardless of format or frequency
- Fully isolates ground between TX and RX sides
- Made in USA
Max Distance | Standard Mode (STD): 330 ft (100m) |
Video Standards | DVI (single link) and HDMI (compliant with HDMI 1.4 video specifications including 12 bit color depth, 3D video and 4K support) |
Signal Type | TMDS |
Connectors | Locking HDMI input, RJ45 HDBaseT output |
Video Resolutions | DVI signal VGA (640×480) thru WUXGA (1920×1200) |
Audio Formats | All HDMI Embedded Audio including: LPCM 7.1CH, Dolby TrueHD and DTS-HD Master Audio (32-192kHz sample rate) |
DDC | Pass-Thru DDC for reading EDID directly from remotely connected LCD and HDCP handshake |
CEC | Pass-Thru CEC for Consumer Electronics Control compatible devices |
RS232 | Bidirectional (full-duplex) any baud rate up to 115,200 |
IR | Extended in both directions. Carrier modulation range from 30 KHz to 60 KHz |
PoH | Power-over-HDBaseT meets IEEE 802.3af standard. |
Power Supply | 100 VAC to 240 VAC, 50-60 Hz, external; 5 VDC, 3.2 A, regulated |
Power | 3.0 watts (10 BTU) maximum |
Temp/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, non-condensing |
Cooling | Convection |
Mounting | Metal |
Enclosure | Metal (Steel ends and Aluminum extrusion) |
Dimensions | 1.18″ H x 4.13″ W x 4.57″ D (30mm H x 105mm W x 116mm D) Depth excludes connectors |
Product weight | Sender: 9.3 oz (0.58 lb or 264 g) |
Vibration | ISTA 1A in carton (International Safe Transit Association) |
Compliance | CE, FCC Class A |
MTBF | 90,000 hours (Calculated Estimate) |
Warranty | 2 years parts and labor |
Manuals | Versions | Last Updated | |
---|---|---|---|
|
UHBX-SC-WP Manual
|
JUNE 24, 2020 |