Product NoticeWhile Supplies Last

UHBX-S-WP

HDMI on Cat6 (HDBaseT™) Wall Plate Transmitter

  • Extends HDMI or DVI video up to 500 ft on just one Cat6
  • RS232 and IR extension in both directions with optional add-on
  • Supports all HDMI or DVI resolutions including 4K (UHD)
  • Wall plate does not need power connection (powered via UTP)
  • Power-over-HDBaseT™ (PoH) meets IEEE 802.3af standard
  • Sturdy and compact metal construction
    • Share

    Description


    The UHBX-S-WP is an HDMI on Cat6 (HDBaseT) single gang wall plate Transmitter. The package includes the following:

    • UHBX-S-WP Decora® metal insert
    • Standard white plastic Decora® face-plate
    • Mud-ring for dry wall installation

    The UHBX-S-WP sender fits in a single gang Decora® style wall plate and is capable of sending a video signal to a compatible receiver ( Hall Research model UHBX-R-PSE ) to a maximum of 150 meters (500 ft) using a single Cat6 cable (Receiver type determines the max distance that can be 70m, 100m, or 150m).

    A second single-gang module ( Hall Research model UHCOM-WP ) can be added to the wall plate to provide RS-232 and IR extension in both directions. The RS-232 can operate at any baud rate including 115,200 at all times.and the IR extension is fully compatible with all standards (SONY, NEC, RC5, SHARP, RCA, etc).

    The wall plate is powered though the Cat6 cable eliminating the need for a separate power supply connection. The wall plate conforms to HDBaseT™ power standard (PoH or IEEE802.3af), making it compatible with any certified HDBaseT™ power sourcing equipment.
    The wall plate sender may be connected to projectors or TVs that have direct HDBaseT™ inputs. In this case no external receiver would be needed. A PoH inserter will be required (Hall Research model 511-POH-30W).

    UHBX-S-WP is fully compatible with the following HDBaseT™ receiver from Hall Research:

    For best results we recommend using Alliance approved cables listed at this site.

    For more information about product compatibility, please follow the link below to the Product Selection Chart.

    HDBaseT Compatibility Chart

    Features

    • Extends HDMI or DVI video up to 500 ft on just one Cat6
    • RS232 and IR extension in both directions with optional add-on
    • Supports all HDMI or DVI resolutions including 4K (UHD)
    • Wall plate does not need power connection (powered via UTP)
    • Power-over-HDBaseT™ (PoH) meets IEEE 802.3af standard
    • Sturdy and compact metal construction
    • Fully compatible with HDBaseT™ standard
    • Includes Mud-Ring for easy installation (no electrical box needed)
    • RS232 supports baud rates to 115K
    • IR extension meets all standards regardless of format or frequency
    • Fully isolates ground between TX and RX sides
    • Locking HDMI input connector
    • Made in USA

    Block Diagram

    Specifications

    Video Standards DVI (single link) and HDMI (compliant with HDMI 1.4 video specifications including 12 bit color depth, 3D video and 4K support)
    Signal Type TMDS
    Connectors Locking HDMI input, RJ45 HDBaseT output
    Video Resolutions DVI: VGA (640x480) to WUXGA (1920x1200)
    HDTV: 480i to 1080p
    Digital Cinema: 4K (4096x2160)
    Supports 4K@60 Hz (4:2:0 8 bit color) or 4K@30 Hz (4:4:4 and 8 bit color)
    Audio Formats All HDMI Embedded Audio including: LPCM 7.1CH, Dolby TrueHD and DTS-HD Master Audio (32-192kHz sample rate)
    DDC Pass-Thru DDC for reading EDID directly from remotely connected LCD and HDCP handshake
    CEC Pass-Thru CEC for Consumer Electronics Control compatible devices
    RS232 Bi-directional (full-duplex) any baud rate upto 115,200
    IR Extended in both directions. Carrier modulation range from 30 KHz to 60
    KHz
    PoH Power-over-HDBaseT™ meets IEEE 802.3af standard. PD side identifies as
    Class 2 (3.84–6.49 watts). Actual power consumption of PD side is 5.5 watts
    max
    Power Supply 100 VAC to 240 VAC, 50-60 Hz, external; 5 VDC, 3.2 A, regulated
    Actual DC current (powering both –PSE and –PD sides) 1.8A max
    Power Sender: 3 watts (10 BTU) maximum
    Temp/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, non-condensing
    Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, non-condensing
    Cooling Convection
    Enclosure Metal
    Dimensions 2.6" H x 1.3" W x 1.8" D (66mm H x 33mm W x 46mm D) Depth.
    Dimensions exclude mounting tabs on front for Decora® plate
    Product weight Sender: 5 oz (0.31 lb or 142 g)
    Shipping: 8.5 oz (0.53 lb or 241 g) includes: mud-ring & faceplate
    Vibration ISTA 1A in carton (International Safe Transit Association)
    Compliance CE, FCC Class A
    MTBF 90,000 hours (Calculated Estimate)
    Warranty 2 years parts and labor

    Downloads

    Manuals Versions Last Updated
    UHBX-S-WP Manual
    JUNE 24, 2020
    Additional Downloads Versions Last Updated
    UHBX-S-WP Decora Insert Detailed CAD Drawing
    JUNE 24, 2020
    UHBX-S-WP Dimensional DXF
    JUNE 24, 2020
    UHBX-S-WP Dimensional PDF
    JUNE 24, 2020
    UHBX-S-WP Rear Cover Detailed CAD Drawing
    JUNE 24, 2020

    Copyright © 2022 Hall Technologies - All Rights Reserved.