U22-160-DP

USB 2.0 over UTP Extender Decora® Wall Plate with 2-Port Hub

  • Extends USB 2.0 devices up to 165 ft (50 m) using Cat5
  • Supports high-speed, full-speed, and or low-speed devices
  • Status LEDs indicate Power and Data
  • Supports Hot Plug/Unplug
  • Can power most USB devices without power supply
  • Plug and Play installation
    • Share

    Description

    The U22-160-DP extends your host PC’s USB 2.0 port across a single Cat5e/6 cable to 50 meters (165 ft) with data rates up to 480 Mb/s.

    In most instances, no power supply is needed for either side as the local (host) side gets its power from the PC and it sends PoC (Power-over-Cable) to the remote (device) side. However for convenience a power supply is included that can be plugged in to the remote end for power hungry USB devices. The local side is in a convenient single-gang Decora® wall-plate. The remote end has a two port hub built-in to allow connection of 2 USB Devices. The U22-160-DP is a perfect solution for industrial and commercial applications.

     

    This product can be used to extend a broad range of USB devices like webcams, printers, keyboards, and disk drives up to 165 ft (50 m) using single Cat 5/6 cable.

     

    Features

    • Extends USB 2.0 devices up to 165 ft (50 m) using Cat5
    • Supports high-speed, full-speed, and or low-speed devices
    • Status LEDs indicate Power and Data
    • Supports Hot Plug/Unplug
    • Can power most USB devices without power supply
    • Plug and Play installation
    • Single-gang Decora® wall plate local (host) side

    Block Diagram

    Specifications

    Bus Interface USB 2.0
    Number of Ports 2 (on the Remote Unit)
    Local unit 1 x USB type B female
    1 x RJ45 Ethernet female
    1 x DC Power supply
    Remote Unit 2 x USB type A female
    1 x RJ45 Ethernet female
    1 x DC Power supply
    LEDs 1 x Power, 1 x Data
    Max Data Rate 480 Mbps
    Max Cable Distance 50m (165 ft)
    Cable Type Cat 5e/6/6a
    Power Supply 5V DC 2A
    Operating Temperature 32 to 122 °F (0 to 50 °C)
    Operating Humidity 20% - 80% RH
    Dimensions Local: 4.5 x 2.7 x 1.8 inch (114 x 69 x 46 mm)
    Remote: 2.5 x 1.3 x 0.9 (65 x 35 x 25 mm)
    Shipping: 9.5 x 8 x 3 inch (24 x 20 x 8 cm)
    Weight Shipping: 1.2 lbs (544 g)

    Downloads

    Manuals Versions Last Updated
    U22-160-DP Manual
    AUGUST 29, 2022
    Spec Sheets Versions Last Updated
    U22-160-DP Spec Sheet
    AUGUST 29, 2022

    Copyright © 2022 Hall Technologies - All Rights Reserved.