Model JAV-DP-HDMI DisplayPort to HDMI™ Active Adapter cable is perfect for converting from a DisplayPort connector to an HDMI™ format for display on an HDMI™ LCD.
The pigtail-style construction does not protrude from the source and provides a flexible connection.
No external power supply is required.
No drivers, Plug and play operation.
- Connect DisplayPort (male) to source and HDMI (female) to display
- Supports resolutions up to 4k@60Hz
- Provides video to display without signal jitter, smearing, ghosting, or missing colors
- Audio is free from noise with a clear sound
- Supports L-PCM @32kHz, 44.1 kHz, Dolby 8-channel 1-bit Audio
Related Products
-
HT-DSCV3-TX
Read moreHT-DSCV3-TX
The HT-DSCV3-TX is a cutting-edge USB 3.2 extender designed for seamless data transfer and power delivery, offering unparalleled versatility and performance. Part of the DSCV3 family, this device supports the USB 3.2 Gen 1×1 standard, achieving blazing-fast 5 Gbit/s data transfer rates while maintaining backward compatibility with USB 3.0, USB 2.0, and USB 1.1 specifications. This ensures smooth integration into both modern and legacy setups.
-
HT-DSCV3-RX-WP
Read moreHT-DSCV3-RX-WP
The Discovery 3 Series Wallplate Receiver is a sleek, in-wall USB 3.2 extender that delivers high-speed 5 Gbit/s data transfer, 90W USB-C charging, and dual HDMI video output (RX-V2 model)—all over a single Cat6a/7 cable up to 90m. With Power over HDBaseT (PoH), only one side needs power, simplifying installation and reducing clutter. Ideal for conference rooms, classrooms, and corporate AV setups, this compact yet powerful solution ensures seamless connectivity and effortless integration.
This receiver can be paired with the HT-DSCV3-TX (requires a separate power supply for the -TX). It can also be paired with HT-DSCV3-TX-WP, however each wall plate will need a 12V 1A power supply connected on the rear of each wall plate.
-
HT-DSCV3-TX-WP
Read moreHT-DSCV3-TX-WP
The DSCV3 family is the next generation of USB 3.2 extension which supports USB 3.2 Gen 1×1 standard. These extenders support 5 Gbit/s data transfer rate and are backwards compatible with USB 3.0, USB 2.0, and USB 1.1 specifications.
This transmitter can be paired with the HT-DSCV3-RX, HT-DSCV3-RX-WP, and HT-DSCV3-RX-V2.
-
HT-DSCV3-RX-V2
Read moreHT-DSCV3-RX-V2
The DSCV3 family includes the POH (Power over HDBT) module, which requires the extenders to be powered on only one side (TX or RX). The transmitter’s built-in PSE module, when connected to local power, provides 60W charging to the host device via USB-C. With the built-in control pass-through, users can control the source from the display’s location or can control the display from the source’s location. And, with their small form factor, the extenders are easy to install in many locations.
**NOTE** The DisplayLink driver is needed for the laptop to send video to the HT-DSCV3-RX-V2. For most Windows laptops, the DisplayLink driver is typically already installed, but for laptops operating on macOS, ChromeOS, Linux, or Android, the driver must be installed. The following link will take you to the latest DisplayLink drivers.
DisplayLink Downloads: Click Here
