discontinued

HR-101-R

Microphone and Line-Level Audio Extender Receiver

  • MIC preamp input
  • Stereo line level audio input
  • Local analog stereo line level and digital SPDIF audio outputs
  • Adjustable gain for MIC preamp input
  • VU meter to indicate MIC preamp gain
  • Phantom power to accommodate a wide range of MIC inputs
    Request a Quote

    ** HR-101-R is discontinued and the FXT-460 is recommended as a substitution for the HR-101-R. **

    The Model HR-101-R Receiver has an ST fiber optic input connector to receive audio from the sender. It provides a stereo line level output on 3.5mm mini-stereo jack and a SPDIF digital audio output on a RCA connector.
    The HR-101 a professional quality Fiber-Optic audio extender kit.
    comprised of two units: a sender (HR-101-S) and a receiver (HR-101-R). The HR-101 can extend an audio over a single multi-mode fiber optic cable spanning distances of over 1000m (3280ft). For lengths of up to 500 meters OM2 or OM3 cables are recommended, and for distances of over 500 meters OM3 cable is recommended.
    The HR-101-S is a compact and professional grade microphone amplifier
    with stereo line-level mix that can be used as a stand-alone device, or paired with the HR-101-R to extend audio over long distances on fiber optic cables.

    • MIC preamp input
    • Stereo line level audio input
    • Local analog stereo line level and digital SPDIF audio outputs
    • Adjustable gain for MIC preamp input
    • VU meter to indicate MIC preamp gain
    • Phantom power to accommodate a wide range of MIC inputs
    • Safety interlock does not turn on high-power fiber LED drivers unless fiber-optic cable is plugged in at both ends
    • Green design, turns off parts of circuit when they are not in use
    • Compact, Rugged, Reliable, and Economical
    • Made in USA
    Audio Inputs

    1x 3.5mm analog line level stereo,
    1x XLR microphone
    Audio Outputs

    1x 3.5mm stereo analog , 1x RCA SPDIF Digital
    Mic In Impedance

    6.8 K?
    Mic Phantom Power

    15vDC (note that most mics rated for 48v accept
    range of 12~48 vDC, with some 9~52 vDC)
    Mic Amplifier Noise

    1.3nV/?Hz RFI at 1KHz
    Mic CMR

    100 dB min
    Audio Bandwidth

    3 Hz to 30 KHz
    Optical Wavelength

    840 nm GaAIAs LED
    Optical Cable

    Simplex (only 1 fiber) Multi-Mode. OM2 or OM3
    Enclosure

    Aluminum and Steel
    Temperature

    Operating: 32 to 122°F (0 to 50°C);
    Storage: –40 to +185°F (–40 to +85°C)
    MTBF

    90,000 hours (calculated estimate)
    Power

    5V DC, 2.6A (actual consumption less than 0.25A)
    Size

    1.64’’H x 4.18’’W x 5.08’’D
    (4.2×10.6×12.9 cm)
    Weight

    0.34 pounds (0.153 kg)

    Spec Sheets Versions Last Updated
    		HR-101-R Spec Sheet

    		JUNE 10, 2023
    Manuals Versions Last Updated
    		HR-101-R Manual

    		JUNE 10, 2023
    Additional Downloads Versions Last Updated
    		HR-101-R Dimensional DXF

    		JUNE 10, 2023
    Additional Downloads Versions Last Updated
    		HR-101-R Dimensional PDF

    		JUNE 10, 2023

    Related Products