EXP-HDBT3-TRX100 and EX-HDBT3-RX100
HDBaseT Expansion Card (Transmitter and Receiver) for the EMCEE200
- Includes EXP-HDBT3-TRX100 Transmitter Slot Card and EX-HDBT3-RX100 Receiver
- For use with the EMCEE200 Presentation Switcher
- Extends HDMI 2.0, Bidirectional IR, RS-232 and transmits/receives PoE over single CAT-6A cable via HDBaseT 3.0 up to 90 meters (295 feet)
- A second HDMI input allows for additional connection of a local source device
EXP-HDBT3-TRX100
The TRX100 is an HDBaseT expansion card for use with the EMCEE200 presentation switcher. This expansion card adds an additional mirrored output to the EMCEE200. The TX100 extends HDMI 2.0, Bi-Directional IR, USB 2.0, RS-232 and transmits PoH over a single CAT6A cable via HDBaseT 3.0 up to 90 meters (295 ft).
EX-HDBT3-RX100
The RX100 is an HDBaseT receiver for use with the EX-HDBT3-TX100 when installed in the EMCEE200 presentation switcher. When connected to the TRX100, this receiver adds an additional mirrored output to the EMCEE200. The RX100 extends HDMI 2.0, Bi-Directional IR, USB 2.0, RS-232 and receives PoE over a single CAT6A cable via HDBaseT 3.0 up to 90 meters (295 ft). A second HDMI input allows for additional connection of a local source device.
- Includes EXP-HDBT3-TRX100 Transmitter Slot Card and EX-HDBT3-RX100 Receiver
- For use with EMCEE200 presentation switcher
- Extends HDMI 2.0, Bidirectional IR, RS-232 and transmits/receives PoE over single CAT-6A cable via HDBaseT 3.0 up to 90 meters (295 feet)
- A second HDMI input allows for additional connection of a local source device
| Video | DVI (single link)HDMI 1.4 and HDMI 2.0b including 12 bit color depth, 3D video and HDCP 1.4/2.2 |
| Resolutions | DVI signal – VGA (640×480) thru WUXGA (1920×1200)HDTV signal 480p through 4K 60 Hz 4:4:4 |
| Connectors | (1) Terminal block 3P RS232(1) 3.5 mm IR IN(1) 3.5 mm IR OUT(1) USB 2.0 Tab B(1) RJ45 HDBT |
| Audio Formats | LPCM 2CH Audio (32, 44.1 and 48 KHz sample rate)Digital Audio multi-channel 2.0, 5.1, 7.1 |
| RS-232 Signals | (1) RX, TX and GND on Terminal StripRS-232 Baud Rate: 115200, N, 8, 1 |
| USB | (1) USB-B Host port – USB 2.0/1.1 compatible |
| IR | (1) 3.5mm IR Receiver: Tip= IR signal, Ring = GND , Sleeve= V+(1) 3.5mm IR Emitter: Tip= IR signal, Sleeve= GND |
| POH Voltage | 48VDC PSE |
| POH Standard | 802.3af POH |
| POH Class | class 3 13.5W |
| Temp / Humidity | Storage: -4?F to 140?F (-20?C to 60?C) / 10% to 90% non-condensingOperating: +32 to +122?F (0 to +50?C) / 10% to 90%, non-condensing |
| Enclosure Type | Aluminum Faceplate |
| Dimensions | 3.6″ W x 4″ D x 0.93″ H (91mm W x 102mm D x 24mm H) |
Related Products
-
EMCEE200
Read moreEMCEE200
- 18G multiview switcher and scaler
- 4K@60 4:4:4 on all Inputs and Outputs
- Picture-In-Picture (PIP) and Picture-Over-Picture (POP) with Multiview
- Recording and 4K Soft Codec Support
- Dual MIC Mixer
- Audio Embedding and De-Embedding
- Confidence and Present Output with Splash Screen Support
- Built-in WEB Page with IR, RS-232, TCP/IP, and Telnet Control
- HDBaseT 3.0 and Amplifier Plugin Module Support
- Additional HDBaseT expansion pack available
-
SPK-IC6
Read moreSPK-IC6
SPK-IC6 is a Fire Rated 40 watt In-Ceiling Speaker with a 1″ titanium dome tweeter and a6.5″ Graphite cone driver with rubber surround.
- Titanium Dome Tweeter
- Graphite Cone
- Sensitivity to 86 dB
- Taps for 8 Ohm, 70 and 100 volts
- Magnetic Speaker Grill
- Fire-Rated Back Box
-
SPK-OW6
Read moreSPK-OW6
Hall Technologies Speakers offer versatility and convenience. SPK-OW6 is a surface mount, 40-watt loudspeaker that includes taps for 8 ohm, 100-volt and 70-volt audio solutions and comes in a white finish.
-
EXP-AMP-4840
Read moreEXP-AMP-4840
The AMP-4840 is an amplifier expansion card for use with EMCEE200. The audio expansion card adds 20 watts per channel of audio output to two speakers at 4? or 8? (user selectable). The amplifier card also supports both mono and stereo modes via toggle button.
