Legacy Products
Showing 73–84 of 415 results
-
UHBX-R-XT
Read moreUHBX-R-XT
- Extends uncompressed HDMI video, RS232, and IR, up to 500 feet on a single CAT6
- Supports multiple units in daisy-chain to allow extending video and data to very long distances
- At Full-HD (1080p), up to 8 receives can be daisy chained
- Individually addressable RS-232 ports on each receiver for controlling connected displays
- Can be directed to send out RS-232 commands on the fly, or to send any of the commands programmed in its internal memory
- Can detect video and use RS-232 to turn displays on and off automatically (from commands uploaded to its internal memory)
-
UH2X-P1
Read more -
UHBX
Read moreUHBX
- Extends HDMI or DVI video to 150m / 500ft on just one Cat6
- Includes RS-232 and IR extension in both directions
- Supports virtually all HDMI and DVI resolutions including 4Kx2K
- Sturdy metal enclosures with mounting provisions
- Complies fully with HDBaseT™ standard
- Fully isolates ground between TX and RX sides
-
EMX-AMP
Read moreEMX-AMP
- 4K HDMI audio extractor with EDID management
- Built-in 50 watt audio amp for direct connection to 8 Ohm speakers (25 watts/channel)
- Audio input for connecting line-level inputs (e.g. wireless microphones)
- Control via, front panel, RS-232, digital pot (rotary encoder)
- HDMI Ducking (when Line input is detected, HDMI sound volume in the mix is automatically lowered)
- Primary RS-232 port for device control
-
511-3A-154WP05
Read more -
EXHD-RG6-R
Read moreEXHD-RG6-R
- Extends HDMI to 70 meters or longer
- Supports resolutions up to 1080p 1920×1080 at 60 Hz
- No user settings, plug-n-play
- Includes Sender with two coax outputs and Receiver with daisy-chain Coax output
- Uses Locking HDMI connectors
-
SC-HD2SDI
Read moreSC-HD2SDI
- Supports resolutions up to 1920×1080 at 60 Hz
- No user settings, plug-n-play
- Two simultaneous SDI outputs
- HDCP compliant (if the HDMI input has HDCP, the SDI outputs will be blanked)
- Uses Locking HDMI connector
-
SC-VHD-HD
Read moreSC-VHD-HD
- Convert VGA and audio to HDMI
- Output resolution independent of input
- State-of-the-art video scaling for real-time frame rate capture & conversion
- Horizontal mirroring (X-axis flip) of output for Teleprompting
- Supports virtually all PC and HDTV input and output resolutions
- OSD adjustment of contrast, brightness, color, size, sampling clock, phase, position, audio source and delay
-
UH2X-S-PSE
Read more -
UH2X-R-PD
Read more -
UHBX-SW3-S
Read moreUHBX-SW3-S
- 2 HDMI inputs and 1 VGA input
- Supports all HDMI resolutions including 4K (UHD)
- VGA input is scaled to 1080p to ensure proper image on all HDMI displays
- Manual or automatic input selection
- Automatic Control of display power via RS-232
- Uses only one Cat6
-
URG-SKU
Read moreURG-SKU
- Receives video on a single CATx cable
- Compatible with UV1/2/4/8-S transmitters
- Adjustable cable length compensation to 1000 ft
- Digitally controlled adjustment eliminates tweaking pots
- Supports resolutions up to 1920×1200 at any refresh rate
- Differential signaling eliminates ground loops and noise
Showing 73–84 of 415 results
-
UHBX-R-XT
Read moreUHBX-R-XT
- Extends uncompressed HDMI video, RS232, and IR, up to 500 feet on a single CAT6
- Supports multiple units in daisy-chain to allow extending video and data to very long distances
- At Full-HD (1080p), up to 8 receives can be daisy chained
- Individually addressable RS-232 ports on each receiver for controlling connected displays
- Can be directed to send out RS-232 commands on the fly, or to send any of the commands programmed in its internal memory
- Can detect video and use RS-232 to turn displays on and off automatically (from commands uploaded to its internal memory)
-
UH2X-P1
Read more -
UHBX
Read moreUHBX
- Extends HDMI or DVI video to 150m / 500ft on just one Cat6
- Includes RS-232 and IR extension in both directions
- Supports virtually all HDMI and DVI resolutions including 4Kx2K
- Sturdy metal enclosures with mounting provisions
- Complies fully with HDBaseT™ standard
- Fully isolates ground between TX and RX sides
-
EMX-AMP
Read moreEMX-AMP
- 4K HDMI audio extractor with EDID management
- Built-in 50 watt audio amp for direct connection to 8 Ohm speakers (25 watts/channel)
- Audio input for connecting line-level inputs (e.g. wireless microphones)
- Control via, front panel, RS-232, digital pot (rotary encoder)
- HDMI Ducking (when Line input is detected, HDMI sound volume in the mix is automatically lowered)
- Primary RS-232 port for device control
-
511-3A-154WP05
Read more -
EXHD-RG6-R
Read moreEXHD-RG6-R
- Extends HDMI to 70 meters or longer
- Supports resolutions up to 1080p 1920×1080 at 60 Hz
- No user settings, plug-n-play
- Includes Sender with two coax outputs and Receiver with daisy-chain Coax output
- Uses Locking HDMI connectors
-
SC-HD2SDI
Read moreSC-HD2SDI
- Supports resolutions up to 1920×1080 at 60 Hz
- No user settings, plug-n-play
- Two simultaneous SDI outputs
- HDCP compliant (if the HDMI input has HDCP, the SDI outputs will be blanked)
- Uses Locking HDMI connector
-
SC-VHD-HD
Read moreSC-VHD-HD
- Convert VGA and audio to HDMI
- Output resolution independent of input
- State-of-the-art video scaling for real-time frame rate capture & conversion
- Horizontal mirroring (X-axis flip) of output for Teleprompting
- Supports virtually all PC and HDTV input and output resolutions
- OSD adjustment of contrast, brightness, color, size, sampling clock, phase, position, audio source and delay
-
UH2X-S-PSE
Read more -
UH2X-R-PD
Read more -
UHBX-SW3-S
Read moreUHBX-SW3-S
- 2 HDMI inputs and 1 VGA input
- Supports all HDMI resolutions including 4K (UHD)
- VGA input is scaled to 1080p to ensure proper image on all HDMI displays
- Manual or automatic input selection
- Automatic Control of display power via RS-232
- Uses only one Cat6
-
URG-SKU
Read moreURG-SKU
- Receives video on a single CATx cable
- Compatible with UV1/2/4/8-S transmitters
- Adjustable cable length compensation to 1000 ft
- Digitally controlled adjustment eliminates tweaking pots
- Supports resolutions up to 1920×1200 at any refresh rate
- Differential signaling eliminates ground loops and noise