Ph: 800-959-6439
Home » Products » UH2X-S-PSE

UH2X-S-PSE

HDMI + USB + LAN over UTP Extender with HDBaseT™ and PoH (Sender)

This product is discontinued. Please visit the UX18-S page for its replacement.

  • Share
REQUEST A QUOTE

Description

The UH2X-S-PSE is an HDMI over single CAT5e/6 Transmitter employing HDBaseT™ 2.0 technology. The product can extend uncompressed audio/video along with IR, RS232, USB 2.0, and IP (Ethernet) using a single run of CAT5e/6 cable up to 100m long. The PoH compliant receiver (Model UH2X-R-PD) does not require a power supply and gets its power through the Cat6 cable from the transmitter (using IEEE802.3af standard). It supports 4K (UHD) and 3D video.

The extender provides audio return extension as well (from receiver to the sender). The independent audio return source is user selectable and can be either from the ARC pin of the HDMI connector at the Receiver (ARC signal from the connected TV), or from a separate SPDIF audio input connector provided on the Receiver.

The Receiver (Model UH2X-R-PD) provides 2 USB 2.0 ports acting as a USB hub.

The USB ports support all USB 1.1 and USB 2.0 devices and comply with HDBaseT 2.0 specifications. The Transmitter can be surface mounted using the integrated mounting brackets.

For more information about product compatibility, please follow the link below to the Product Selection Chart.

HDBaseT Compatibility Chart

Features

  • Fully compliant with HDBaseT 2.0 specifications
  • Extends Ethernet (100BaseT), bi-directional IR and RS232 control signals
  • Extends USB 2.0
  • Supports Full HD (1080p/60), 3D and deep color to 100m
  • Supports 4K (UHD) Video to 60m (200 ft)
  • Perfect for KVM extension.
  • Front panel LED indicators for status monitoring
  • Plug and play installation – takes minutes to setup
  • Supports pass through of HDMI embedded audio formats: LPCM 2/5.1/7.1 Channel, Dolby Digital 2~5.1 Channel, Dolby Digital Plus, Dolby TrueHD and DTS-HD Master Audio
  • Supports HDMI ARC and external SPDIF digital audio return
  • Supports HDMI Locking Cable
  • USB ports can power devices such as audio extractors (Model HD-AUD)

Block Diagram

Specifications

Video Resolution HDTV Signals:
480i to 1080p@50/60, 1080p@24, 4K2K per following:
3840x2160@24/25/30, 4096x2160@24, 3840x2160@60 (4:2:0)
For DVI signals:
VGA (640x480) thru WUXGA (1920x1200)
Video Bandwidth 340 MHz/10.20 Gbps
Audio Standards LPCM 2/5.1/7.1CH, Dolby Digital 2~5.1CH, DTS 2~5.1CH, Dolby TrueHD and DTS-HD Master Audio
Transmitter Input Ports 1 x HDMI, 1 x RS232, 1 x IR, 1 x USB
Transmitter Output Ports 1 x HDBaseT, 1 x IR, 1 x SPDIF
Transmitter Power Supply 110-120V AC, 50-60 Hz
48 VDC @ 0.83A (US/EU Standard, CE/FCC/UL Certified)
Receiver Input Ports 1 x HDBaseT, 1 x IR, 1 x SPDIF
Receiver Output Ports 1 x HDMI, 1 x RS232, 1 x IR, 2 x USB
Receiver LAN 1 x RJ45, Bidirectional
ESD Protection Human Body model:
8kV (air-gap discharge)
4kV (contact discharge)
Dimensions 7.3” (185mm) W x 5.1” (130mm) D x 1.3” (33mm) H
All protrusions included
Weight Shipping: 3.0 Lbs
Enclosure Metal
Operating Temperature Storage: -4 to +140 °F (-20 to 60 °C) / 20% to 90%, non-condensing
Operating: +32 to +104 °F (0 to 40 °C) / 20% to 90%, non-condensing
MTBF 90,000 estimated
Warranty 2 years parts and labor

Downloads

Manuals Versions Last Updated
UH2X-P1 Manual
JUNE 24, 2020
Additional Downloads Versions Last Updated
UH2X-S-PSE & UH2X-R-PD Dimensions
JUNE 24, 2020

Copyright © 2022 Hall Technologies - All Rights Reserved.