Legacy Products
Showing 361–372 of 415 results
-
CEXP-H2
Read more -
MC-4HRT
Read moreMC-4HRT
- Connects between keyboard and 4-to-1KM to allow placement of the switch off the desktop
- Provides a visual indication of the selected CPU
- No need to remember “Hot-Key” sequences of the KVM switch to switch among PC’s
- Allows the KVM Switch to be located off of your desk-top
- No Power Supply needed
- Extremely easy to install
-
MC4-H2
Read moreMC4-H2
- No software required
- Clear and sharp video switching
- Extremely Reliable
- Dual Video outputs switched, buffered, and output simultaneously
- Quick and seamless switching between PC’s
- LED indicators of PC power status and PC selected
-
4-to-1KVM
Read more4-to-1KVM
- Eliminates the need for 4 separate keyboards, mice and monitors.
- No software required
- Clear and sharp video switching (video resolutions to 1600×1200 at 50 to 85 Hz refresh rate)
- Extremely Reliable
- Quick and seamless switching between PC’s
- LED indicators of PC power status and PC selected
-
VS4-YCA
Read moreVS4-YCA
- Serial Port for Control via external device
- Buffered output; perfect for high quality video
- Scan mode to cycle through each input.
- LED Indicators
- Rugged Shielded Metal Enclosure
- Installs in minutes
-
VSM-802B
Read moreVSM-802B
- With its large bandwidth it can handle even very high resolutions and refresh rates, up to 1600 x 1280 pixels at up to 85 Hz
- Includes two serial keypads, so it’s ready to go right out of the box
- Because it has a universal power supply, you can plug it in almost anywhere if you have the right input cord
- Small and light enough to take almost anywhere
- Designed to carry VGA/XGA video, but it can handle separate horizontal and vertical sync, composite sync, and sync on green (with proper cables and adapters)
- All input and output signals are buffered for the sharpest possible images
-
VSM-404
Read moreVSM-404
- Switching is easy with the included keypad
- RS-232 port allows control from serial device (or PC using MatrixMon free software)
- Perfect video – even at 1600 x 1200 resolution
- All inputs are terminated and all outputs are buffered
- Can drive video as far as 150 ft. (45 m)
- Universal power supply included
-
VS-20
Read moreVS-20
- Allows a monitor to display any one of 20 inputs
- Inputs are terminated and buffered for a sharp and perfect reproduction at the output
- Output can drive cables in excess of 300 feet by means of a proprietary compensation network
- RS232 “Serial Port” is provided on the unit to control the selection for the output
- A Serial Keypad is supplied with each unit
- Designed and manufactured in the USA
-
VS-4
Read moreVS-4
- Allows one monitor to be switched between 4 video sources
- Can be controlled manually, via Serial port , or automatically based on video
- Output can be blanked
- User assigned priorities in Auto mode
- Infinite switching cycle life
- Can drive long cables
-
VS-2X2
Read moreVS-2X2
- Allows two monitors to be switched between one of two video sources
- Can be controlled manually, via Serial port, or from TTL level (or contact closure)
- Select input 1, input 2, or blank the output
- Auto mode automatically scans and selects the input with active video
- Infinite switching cycle life
- Can drive long cables
-
HR-722A
Read moreHR-722A
- Transmits VGA, SVGA, XGA and WXGA (640 x 480 up to 1366 x 768)
- Supports HDTV resolutions of 480p, 720p and 1080i (RGBHV format only)
- Uses all digital processing and transmission for crystal clear signals and no color pixel skewing
- Requires no adjustments, equalization or de-skewing during installation
- Transmits signals over one single mode or multi-mode fiber optic core at 1310 nm
- Virtually no audio/video skew
-
CUTP-ZP-1000-BLK
Read more
Showing 361–372 of 415 results
-
CEXP-H2
Read more -
MC-4HRT
Read moreMC-4HRT
- Connects between keyboard and 4-to-1KM to allow placement of the switch off the desktop
- Provides a visual indication of the selected CPU
- No need to remember “Hot-Key” sequences of the KVM switch to switch among PC’s
- Allows the KVM Switch to be located off of your desk-top
- No Power Supply needed
- Extremely easy to install
-
MC4-H2
Read moreMC4-H2
- No software required
- Clear and sharp video switching
- Extremely Reliable
- Dual Video outputs switched, buffered, and output simultaneously
- Quick and seamless switching between PC’s
- LED indicators of PC power status and PC selected
-
4-to-1KVM
Read more4-to-1KVM
- Eliminates the need for 4 separate keyboards, mice and monitors.
- No software required
- Clear and sharp video switching (video resolutions to 1600×1200 at 50 to 85 Hz refresh rate)
- Extremely Reliable
- Quick and seamless switching between PC’s
- LED indicators of PC power status and PC selected
-
VS4-YCA
Read moreVS4-YCA
- Serial Port for Control via external device
- Buffered output; perfect for high quality video
- Scan mode to cycle through each input.
- LED Indicators
- Rugged Shielded Metal Enclosure
- Installs in minutes
-
VSM-802B
Read moreVSM-802B
- With its large bandwidth it can handle even very high resolutions and refresh rates, up to 1600 x 1280 pixels at up to 85 Hz
- Includes two serial keypads, so it’s ready to go right out of the box
- Because it has a universal power supply, you can plug it in almost anywhere if you have the right input cord
- Small and light enough to take almost anywhere
- Designed to carry VGA/XGA video, but it can handle separate horizontal and vertical sync, composite sync, and sync on green (with proper cables and adapters)
- All input and output signals are buffered for the sharpest possible images
-
VSM-404
Read moreVSM-404
- Switching is easy with the included keypad
- RS-232 port allows control from serial device (or PC using MatrixMon free software)
- Perfect video – even at 1600 x 1200 resolution
- All inputs are terminated and all outputs are buffered
- Can drive video as far as 150 ft. (45 m)
- Universal power supply included
-
VS-20
Read moreVS-20
- Allows a monitor to display any one of 20 inputs
- Inputs are terminated and buffered for a sharp and perfect reproduction at the output
- Output can drive cables in excess of 300 feet by means of a proprietary compensation network
- RS232 “Serial Port” is provided on the unit to control the selection for the output
- A Serial Keypad is supplied with each unit
- Designed and manufactured in the USA
-
VS-4
Read moreVS-4
- Allows one monitor to be switched between 4 video sources
- Can be controlled manually, via Serial port , or automatically based on video
- Output can be blanked
- User assigned priorities in Auto mode
- Infinite switching cycle life
- Can drive long cables
-
VS-2X2
Read moreVS-2X2
- Allows two monitors to be switched between one of two video sources
- Can be controlled manually, via Serial port, or from TTL level (or contact closure)
- Select input 1, input 2, or blank the output
- Auto mode automatically scans and selects the input with active video
- Infinite switching cycle life
- Can drive long cables
-
HR-722A
Read moreHR-722A
- Transmits VGA, SVGA, XGA and WXGA (640 x 480 up to 1366 x 768)
- Supports HDTV resolutions of 480p, 720p and 1080i (RGBHV format only)
- Uses all digital processing and transmission for crystal clear signals and no color pixel skewing
- Requires no adjustments, equalization or de-skewing during installation
- Transmits signals over one single mode or multi-mode fiber optic core at 1310 nm
- Virtually no audio/video skew
-
CUTP-ZP-1000-BLK
Read more