The HR-722A Fiber Optic Communication System allows direct connection of VGA computers for signal transmission over Fiber Optic cable spanning distances to 2500 ft (0.75 kilometers) on multi-mode or 35 kilometers on single-mode fiber (approximate based on loss budget). The HR-722A features excellent picture quality with bright and sharp images. Gone are the usual signal degradation and smearing of coax or twisted pair video transmission at extended lengths. Signal integrity is also maintained through fiber optic cables’ immunity to electrical interference and cross talk. The lightweight and small diameter fiber reduces installation time, particularly since only 1 fiber is needed. Fiber optic cable also has certain intrinsic benefits for installation success including resistance to electromagnetic interference (EMI), lightning, and the elimination of ground loops through electrical isolation.
Video Specs | Number of Video Channels ............... 1 RGBHV RGB Processing ................................ 24 bits, no compression or scaling Input Impedance ................................ RGB: 75 Ohms; H & V: Hi-Z Input Level .......................................... RGB: 714 mV p-p; H & V: 3 to 5 V p-p H Sync Frequency Range ...................15 to 60 kHz V Sync Frequency Range ...................30 to 85 Hz RGB Format Supported .......................RGB with separate H and V |
Audio Specs | Number of Audio Channels ................ 2, unbalanced Frequency Response ......................... +0/-0.5 dB, 20 Hz - 20 kHz Bits-per-Sample/Sampling Rate .......... 24 bits; 54 kHz Maximum Audio Level.......................... +10 dBu SNR (A-Weighted)................................ 95 dB Input Impedance.................................. >24 k Ohms Output Impedance .............................. < 1 Ohm Audio to Video Diff. Delay (skew) ....... <300 uSec |
General Specs | Power Requirements .......................... 9-24 v DC or AC, 5 watts (Universal power supply is included) Operating Temperature Range ........... -20 to +60 degrees C Optical Connectors............................... ST Operating Wavelength ........................ 1310 nm Physical Size ....................................... 5 W x 1.15 H x 5.25 L (inches) Weight ................................................. approx. 10 oz.; 0.284 kg |
Manuals | Versions | Last Updated | |
---|---|---|---|
![]() |
HR-722A Manual | JUNE 24, 2020 | |
Spec Sheets | Versions | Last Updated | |
![]() |
HR-722A Spec Sheet | JUNE 24, 2020 |
Copyright © 2022 Hall Technologies - All Rights Reserved.