UV1

Mini-Cat Video + Power Over UTP Extension

  • Eliminates the need for bulky, expensive and hard to build multi-coaxial cables for High-Resolution A/V extension
  • Amplifies the signal for clean and crisp transmission
  • Differential signaling eliminates ground loops and noise
  • Handles resolutions up to 1920×1440 at 60Hz
  • Rugged, Reliable, Compact size
  • Only one end requires power in most applications. Power supply can be connected at the sending or the receiving end, whichever convenient.

    The UV1 is a single channel VGA video extender kit consisting of a sender (UV1-S) and a receiver (UV1-R). The sender converts a PC's VGA signal into a format that can be transmitted using a single inexpensive and commonly available Category-5 Unshielded Twisted Pair (UTP) cable with RJ45 connectors. The Cat5 signal is converted at the receiver back to VGA for connection to your monitor, projector or other display device. The UV1 can extend HD video up to 500 feet (150 meters) with little to no degradation of video quality.

    The sender and receiver are each housed in a small plastic enclosure. Included with the pair of devices are: one small power adapter (can be powered at either end), and a short adapter cable for easy connection to the standard HD-15 connector of the PC.

    • Eliminates the need for bulky, expensive and hard to build multi-coaxial cables for High-Resolution A/V extension
    • Amplifies the signal for clean and crisp transmission
    • Differential signaling eliminates ground loops and noise
    • Handles resolutions up to 1920×1440 at 60Hz
    • Rugged, Reliable, Compact size
    • Only one end requires power in most applications. Power supply can be connected at the sending or the receiving end, whichever convenient.
    • Drive standard Cat5 cables to 500 feet for (VGA and Component Video) or to 2000 feet for (Composite Video and Audio)
    • EDID Emulation available in both standard and custom programming
    Dimensions

    UV1-Sender & UV1-Receiver each
    0.8″ H x 1.7″ W x 4.5″ D

    Weight

    2 lbs. (shipping)

    Power Supply

    From utility-power (mains) outlet, through included external power adapter. Output Voltage: 9v DC Center-Positive. Current requirement 500 ma max

    Max Distance

    Up to 500 ft. (150 m) for VGA and Component Video models, or 2000 ft (609 m) for Composite Video and Audio models

    Resolution

    Up to 1920×1440 non-interlaced at 60Hz

    Standards

    VGA, SVGA, XGA, or UXGA video

    Video Types

    VGA through UXGA, RGBS, RGsB (sync on green), or YpbPr

    Manuals Versions Last Updated
    UV1 Manual

    JUNE 24, 2020