U97-Ultra-2B-S

Model U97-Ultra-2B-S All-In-One Console Extender - Sender

  • Combines the functions of U97-H2, UU2X4, two SKU-RGB, DVC-3 video test pattern generator and more
  • Eliminates the need for Utility Box (Receiver includes a guard plate that goes over all the connectors with zip-tie provisions)
  • Does not require external power supply (built-in supply with standard 110~240 VAC IEC320 jack)
  • Includes 2 “Direct” USB ports (DR1 & DR2), and a Standard with Hub at receiver.
  • DB15 connector for Amplified audio input and loop output at the sender as well as DB15 output at the receiver to directly drive passive speakers
  • Built-in video Skew Correction on both video channels. This corrects the lacks of RGB convergence when long Cat6 cables are used. Eliminates the need to use special low-skew UTP cables for long runs.
  • Share

Description

The Hall Research Technologies Model U97-Ultra-2B-S Sender is part of the U97-Ultra-2B kit and is used to extend Dual Display PC Video, Stereo Audio (amplified or line level), RS-232, and up to 3 independent USB ports to a remote location up to 500 feet away on any Category Cable (CAT5e/6 etc).

This product is a rack-mountable Sender Unit that connects to the Model U97-Ultra-2B-R wall-mountable Receiver. Both the Sender and Receiver can be purchased as a kit as a Model U97-Ultra-2B.

Features

  • Combines the functions of U97-H2, UU2X4, two SKU-RGB, DVC-3 video test pattern generator and more
  • Eliminates the need for Utility Box (Receiver includes a guard plate that goes over all the connectors with zip-tie provisions)
  • Does not require external power supply (built-in supply with standard 110~240 VAC IEC320 jack)
  • Includes 2 “Direct” USB ports (DR1 & DR2), and a Standard with Hub at receiver.
  • DB15 connector for Amplified audio input and loop output at the sender as well as DB15 output at the receiver to directly drive passive speakers
  • Built-in video Skew Correction on both video channels. This corrects the lacks of RGB convergence when long Cat6 cables are used. Eliminates the need to use special low-skew UTP cables for long runs.
  • Built-in Test pattern generator for long cable compensation (High Frequency Gain) and Skew correction.
  • Supports DDC channel with EDID (Extended display ID)

Block Diagram

Specifications

Video Inputs PC outputs (VGA to WQHD)
Resolutions PC resolutions up to 2560x1440 @ 60 Hz
Video Levels 0 to 0.7v p-p
Dimensions Sender (H x W x D) - 1.5 x 19 x 5.06
Receiver (H x W x D) - 1.75 x 14 x 4.06
Weight Sender - 4 Lbs
Receiver - 3 Lbs
USB Support High Speed devices (12Mb/s)
Low Speed devices (1.5Mb/s)
High Speed devices on DR1 and DR2 only (480Mb/s)
UTP Cable Up to 330 feet using any Cat5e or 500 ft using Cat6
Temperature Operating: 32 to 122 DegF (0 to 50 DegC);
Storage: -40 to +185 DegF (-40 to +85 DegC)
Enclosure Steel
MTBF 90,000 hours (calculated estimate)
Power 100VAC to 240VAC 50/60Hz

Downloads

Manuals Versions Last Updated
U97-Ultra Manual
JUNE 24, 2020
Spec Sheets Versions Last Updated
U97-Ultra-2B Spec Sheet
JUNE 24, 2020

Copyright © 2021 Hall Technologies - All Rights Reserved.