SPK-820T

Ceiling Tile Speaker, 2ftx2ft, 8 Ohm

  • Installs quickly into suspended tile ceilings
  • Supported by the T-bar grid
  • Acoustically transparent perforated grille blends with ceiling tiles
  • 24 watts maximum continuous program power handling
  • Excellent frequency response in its class 50 Hz to 18 KHz at 95 dB SPL
  • 3.5 inch deep protective enclosure over the speaker

Designed for operation with Hall Research “VSA Series” room control systems, these speakers are perfect for unobtrusive appearance and easy installation in suspended ceiling applications.

They are shipped ready to install and require no speaker cut-outs in the tile. The fully enclosed and protected driver is mounted to a fine perforated 2' x 2' square grille finished in white powder epoxy for long lasting appearance that blends perfectly and unobtrusively.

Speakers include Five (5) seismic tie-off points and meet plenum requirements. No assembly required.

  • Installs quickly into suspended tile ceilings
  • Supported by the T-bar grid
  • Acoustically transparent perforated grille blends with ceiling tiles
  • 24 watts maximum continuous program power handling
  • Excellent frequency response in its class 50 Hz to 18 KHz at 95 dB SPL
  • 3.5 inch deep protective enclosure over the speaker
  • Meets Plenum Requirements
Frequency Response

65 Hz ~ 17 KHz

Impedance

8 Ohms

Max Power

24w continuous program or 12w continuous pink noise (EIA 426A)

Average Sensitivity

92 dB-SPL 1W/1M

Magnet Material

BeFe Ceramic

Coverage angle

100° -6 dB @ 2 kHz

Audio Connection

Pre-cut 7” color-coded leads

Seismic tie-off points

5 places available

Grill Size

1.984 ft x 1.984 ft

Grill Finish

Baked epoxy hybrid

Depth

3.44 inch

Weight

2.7 Kg (6 lbs)

Manuals Versions Last Updated
SPK-820T Manual

JUNE 24, 2020