This is a 1 – gang wall-plate transmitter. It supports resolutions up to 4K@60 4:2:0 8bit, and HDCP 2.2 compatibility. It can transmit 4K signal up to 35m/115ft via a single Cat 5e/6 cable and up to 40m/131ft via a single Cat 6A/7 cable. With one-way PoC function, the transmitter can be powered by the receiver (the receiver should support this function). The transmitter also features one-way IR pass-through from transmitter to receiver, CEC pass-through, and RS232 pass-through over HDBT, and it also supports firmware upgrading through RS232 port. The transmitter can be used with HT-AIM-70-RX receiver.
HT-AIM-70-WP Features:
- HDMI 1.4 with 4K@60Hz 4:2:0 8bit and HDCP 2.2 compatibility.
- Supports signal transmission up to 35m/115ft for 4K and 60m/197ft for 1080P via a single Cat 5e/6 cable.
- Supports signal transmission up to 40m/131ft for 4K and 70m/230ft for 1080P via a single Cat 6A/7 cable.
- Supports one-way IR pass-through from transmitter to receiver.
- Supports CEC pass-through via HDBT port.
- Supports firmware upgrade through RS232 port, and can be set through the DIP switch.
Hall Technologies guarantees that the supplied equipment is free from defective workmanship and materials. Subject to the agreements set forth, Hall Technologies will repair or replace, at its option, the defective components for a period of 3 years from the date of purchase if purchased after January 1st, 2016. Equipment purchased before January 1st, 2016 have a 2 year warranty. Warranty is void if item is subject to improper use, negligence, or unauthorized modification. All products Hall Technologies sells have no user serviceable parts inside. Opening the unit without written permission from Hall Technologies will void the warranty.
- HDMI 1.4 with 4K@60Hz 4:2:0 8bit and HDCP 2.2 compatibility.
- Supports signal transmission up to 35m/115ft for 4K and 60m/197ft for 1080P via a single Cat 5e/6 cable.
- Supports signal transmission up to 40m/131ft for 4K and 70m/230ft for 1080P via a single Cat 6A/7 cable.
- Supports one-way PoC, the transmitter can be powered by the receiver with PSE module.
- Supports one-way IR pass-through from transmitter to receiver.
- Supports CEC pass-through and RS232 pass-through via HDBT port.
- Supports firmware upgrade through RS232 port, and can be set through the DIP switch.
| Spec Sheets | Versions | Last Updated | |
|---|---|---|---|
|
|
|
1.0 | JUNE 24, 2020 |
| Manuals | Versions | Last Updated | |
|
|
HT-AIM-70_Manual
|
1.0 | JUNE 24, 2020 |
