HR-101-S

** HR-101-S is discontinued and the FXT-460 is recommended as a substitution for the HR-101-S. **

The HR-101-S is a compact and professional grade microphone amplifier with stereo line-level mix that can be used as a stand-alone device, or paired with the HR-101-R to extend audio over long distances on fiber optic cables. The HR-101-S provides a balanced mic input on an XLR connector as well as a stereo line level input on 3.5mm mini-stereo jack.
The unit has an adjustable-gain low noise mic pre-amp with a gain range of +34 to +54 db (or x50 to x500) and provides indication of volume level on digital VU meter on its front panel (to prevent saturation and clipping due to too much gain). The unit accommodates a wide range of microphone types. Phantom power can be inserted by means of a front panel switch. The stereo line input is on a standard 3.5mm (1/8 inch) connector which gets mixed with the amplified microphone signal.
In a typical application a presenter can hookup the audio from their PC to the line input and plug the mic to the XLR. The unit will mix the speakers voice with the PC audio. The HR-101-S has both stereo analog (on 3.5mm) and SPDIF digital (on RCA) outputs as well as a fiber-optic ST connector for driving long cables to 3,280 ft. to compatible receiver.

• MIC preamp input
• Stereo line level audio input
• Local analog stereo line level and digital SPDIF audio outputs
• Adjustable gain for MIC preamp input
• VU meter to indicate MIC preamp gain
• Phantom power to accommodate a wide range of MIC inputs
• Safety interlock does not turn on high-power fiber LED drivers unless fiber-optic cable is plugged in at both ends
• Green design, turns off parts of circuit when they are not in use
• Compact, Rugged, Reliable, and Economical
• Made in USA