HBX-R
HDMI Video Extender With Ultra-HD AV, IR, RS232 and Ethernet (Receiver)
- Fully Compliant with HDBaseT standard
- Supports virtually all HDMI and DVI resolutions including 4K UHD
- Extends, Video, Audio, RS-232, IR, and Ethernet
- Supports extension to 100 m (330 ft)
- Fully isolates grounds between TX and RX sides
- Compact, Rugged, Reliable, and Economical
This product is a Class A HDBaseT compliant Receiver that supports 100meter Cat6 range and is used to extend HDMI, RS-232, IR, and Ethernet (100BaseT) up to 100 meters (328 feet) using a single Cat6 cable.
Since the product uses the HDBaseT standard, video is extended pixel-by-pixel with no compression or latency. The extender supports all PC and HDTV Resolutions including 4K @ 30 Hz 4:4:4 or 4K @ 60 Hz 4:2:0. The IR extension preserves the modulation (carrier) frequency thereby providing compatibility to most standards.
Receiver includes a universal 5v power supply. IR emitter and IR detector cables are included.
Not compatible with the ECHO Family of products
Note about Power Supply
When connected to HBX-S, the Receiver needs the power supply connected as shown above. However, certain Senders, such as the HSM-44-BX Matrix Switch provide Power-over-Cable on their HDBaseT outputs eliminating the need for connecting a power supply to the Receiver.
For more information about product compatibility, please follow the link below to the Product Selection Chart.
- Fully Compliant with HDBaseT standard
- Supports virtually all HDMI and DVI resolutions including 4K UHD
- Extends, Video, Audio, RS-232, IR, and Ethernet
- Supports extension to 100 m (330 ft)
- Fully isolates grounds between TX and RX sides
- Compact, Rugged, Reliable, and Economical
- Plug and play, no configuration needed
- Receiver can be powered via PoC from senders that provide PoC such as HSM-44-BX Matrix Switch with HDBaseT outputs
| Video Standards | DVI (single link) and HDMI (compliant with HDMI 1.4 video specifications including |
| Signal Type | TMDS |
| Resolutions | DVI signal – VGA (640×480) thru WUXGA (1920×1200) |
| Audio Formats | All HDMI Embedded Audio including: LPCM 7.1CH, Dolby TrueHD and DTS-HD |
| DDC | Pass-Thru DDC for reading EDID directly from remotely connected LCD and HDCP |
| CEC | Pass-Thru CEC for Consumer Electronics Control compatible devices |
| RS232 | Bidirectional (full-duplex) any baud rate up to 115,200 |
| Ethernet | 100BaseT Ethernet LAN |
| IR | Extended in both directions. Carrier modulation range from 30 kHz to 60 kHz |
| Power Supply | 100 VAC to 240 VAC, 50-60 Hz, external; 5 VDC, 2 A, regulated |
| Power | Sender & Receiver: 10 watts maximum |
| Temp/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, non-condensing |
| Cooling | Convection |
| Mounting | End plates with hole for surface mounting |
| Enclosure type | Metal (Aluminum ends, Aluminum Extrusion) |
| Dimensions | 1.0″ H x 3.9″ W x 3.9″ D (25mm H x 100mm W x 100mm D) |
| Product weight | Sender 9.3 oz (0.58 lb or 264 g) |
| Safety | CE |
| EMI/EMC | CE, FCC Class A |
| MTBF | 90,000 hours (Calculated Estimate) |
| Warranty | 3 years parts and labor |
| Manuals | Versions | Last Updated | |
|---|---|---|---|
|
|
HBX-S/HBX-R Manual
|
1.0 | JUNE 24, 2020 |
Related Products
-
HSM-44-BX
Read moreHSM-44-BX
- HDCP 2.2 and 4K UHD
- Simultaneous HDMI and HDBaseT on each output
- Extends HDMI, IR, RS-232, Ethernet, and Power on HDBaseT
- Intuitive front panel control with two-line LCD
- Analog and Digital Extracted Audio Outputs
- Uses Genesis Control Command Set (GCCS)
-
CHD-SF*
Read moreCHD-SF*
- Provides 18 Gb/s to support 4K UltraHD 60Hz video
- Available from 1 ft to 50 ft in length
- Increases retention force and ensures robust video connection
- Springy tabs on the top match slots in mating connectors
- Snaps in and can provide tactile and audible feedback
-
HBX-S
Read moreHBX-S
- Fully Compliant with HDBaseT standard
- Supports virtually all HDMI and DVI resolutions including 4K UHD
- Extends, Video, Audio, RS-232, IR, and Ethernet
- Supports extension to 100 m (330 ft)
- Fully isolates grounds between TX and RX sides
- Compact, Rugged, Reliable, and Economical
