Product NoticeWhile Supplies Last

EX-HDU-R

HDMI and USB Extension on CAT6 with Audio and Integrated Control Receiver

  • Extends HDMI + USB 2.0 to 150 ft (46 m) on one Cat 6 cable
  • Supports HDTV resolutions to 1080p 60 Hz
  • Wall plate sender has 2-port hub for connection to USB devices to the host PC
  • Receiver provides HDMI, 4 USB ports, RS-232 for display control, contact closure I/O, and Stereo Audio outputs
  • Perfect for Interactive displays, Soft CODECs, and KVM extension
  • Wall plate does not require separate power supply
    • Share

    Description

    The EX-HDU-R is the Receiver end of the EX-HDU.  The EX-HDU system is used to extend HDMI video and USB data on a single Cat6 cable up to 150 ft (46 meters). HDMI audio is extracted and is provided both as analog stereo and multi-channel digital. The EX-HDU can also be used to control other equipment by providing programmable contact closure I/O, RS-232 output, IR output, and optional LAN interface with internal WebGUI and IP control.

    Functional Block Diagram

    The EX-HDU extender consists of an EX-HDU-WP single-gang wall plate transmitter and an EX-HDU-R (or EX-HDU-R-IP) receiver. They connect using standard CAT5e/6 UTP cabling up to 150 feet (46 Meters) long.

    The wall-plate Sender gets its power from the Receiver via the same UTP cable and does not need a separate power supply. For convenience, the wall plate features a USB hub with two USB ports for connection of USB devices. The plug-and-play extender is compatible with all PCs, MACs, and Android Tablets and does not require driver installation. Simply plug the PC’s HDMI and USB ports to the sender and make them available at the remote receiver.

    The Receiver provides HDMI video output, stereo audio output, 4 USB ports, IR output, and a terminal strip that has RS-232 output plus 4 programmable digital I/O ports. A mini-USB port is also provided for configuration upload from a PC for cases where the Receiver is used also as a control system.

    Users can upload RS-232 commands to the EX-HDU to control other equipment such as turning a projector on and off. Commands can be triggered automatically by detecting video, or manually via the internal WebGUI, or by sensing open and close contact events on the I/O ports. For example, a simple toggle switch can be connected remotely to activate RS-232 commands for turning a projector on and off. The I/O ports can be configured to act as INPUTS or OUTPUTS. When an I/O port is configured as OUTPUT, it can trigger relays, for example to lower or raise a motorized projector screen.

    Under the Downloads tab above, a free PC software is available for configuring the system and to upload control commands.

    Introductory Video

    Receiver with IP connectivity is the model EX-HDU-R-IP. It provides an ETHERNET port for control via IP commands or internal webpage.

    WebGUI Example
    Example of WebGUI control (for units with IP interface)

    Features

    • Extends HDMI + USB 2.0 to 150 ft (46 m) on one Cat 6 cable
    • Supports HDTV resolutions to 1080p 60 Hz
    • Wall plate sender has 2-port hub for connection to USB devices to the host PC
    • Receiver provides HDMI, 4 USB ports, RS-232 for display control, contact closure I/O, and Stereo Audio outputs
    • Perfect for Interactive displays, Soft CODECs, and KVM extension
    • Wall plate does not require separate power supply
    • Receiver is available with optional IP and WebGUI control

    Block Diagram

    Specifications

    Video Standards DVI (Single Link)
    HDMI 1.4
    HDCP 1.1
    SIgnal Type TMDS
    Connectors EX-HDU-WP
    (1) HDMI Input
    (1) Type B USB Host PC Connection
    (2) Type A USB hub port Extension

    EX-HDU-R
    (1) HDMI Output
    (4) Type A USB hub port Extension
    (1) Mini-B USB for configuration
    Resolutions DVI - VGA (640x480) thru WUXGA (1920x1200)
    HDTV - 480p thru 1080p60
    (no interlaced support)
    USB Standards Compatible with USB 2.0 and all previous USB standards and data rates.
    Audio Format LPCM 2 Channel Audio (32-192kHz sample rate)
    Power Supply 100 to 240 VAC, 47-63 Hz, External; 12VDC
    Temperature/Humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, non-condensing
    Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, non-condensing
    Cooling Convection
    Enclosure Metal (Steel)
    Dimensions EX-HDU-WP - 2.60" H x 1.30" W x 1.80" D (66mm H x 33mm W x 46mm D)
    EX-HDU-R - 1.18" H x 4.13" W x 4.57" D (30mm H x 105mm W x 116mm D)
    Depth includes mounting flanges
    Weight Model Only
    EX-HDU-WP - 0.75 lb
    EX-HDU-R - 1.20 lb
    Shipping
    EX-HDU-WP - 1.25 lb
    EX-HDU-R - 1.70 lb
    EX-HDU-WP + EX-HDU-R - 2.50 lb
    Vibration ISTA 1A in carton (International Safe Transit Association)
    Safety CE
    EMI/EMC CE, FCC Class A
    MTBF 90,000 hours (Calculated Estimate)
    Warranty 3 years parts and labor

    Downloads

    Manuals Versions Last Updated
    EX-HDU GUI Insert
    JUNE 24, 2020
    EX-HDU Manual
    JUNE 24, 2020
    Software Versions Last Updated
    EX-HDU GUI
    JUNE 24, 2020
    Additional Downloads Versions Last Updated
    Screen Up/Down control
    JUNE 24, 2020

    Copyright © 2022 Hall Technologies - All Rights Reserved.