EX-HDU-IP

HDMI and USB Extension on CAT6 with Audio, Integrated Control and IP

  • Extends HDMI + USB 2.0 to 150 ft (46 m) on one Cat 6 cable
  • Wall plate sender has 2-port hub for connection to USB devices to the host PC
  • Receiver provides HDMI, 4 USB ports, plus contact-closure I/O and RS-232 for display control
  • HDMI Audio Extracted output (L/R analog) on Receiver
  • Perfect for Interactive displays, Soft CODECs, and KVM extension
  • Wall plate does not require separate power supply

    Accessories

    CIR-EMT

    IR Emitter Cable

    Read More

    CIR-KIT-EMT2

    IR Emitter Cable and Cover

    Read More

    The EX-HDU is used to extend HDMI video and USB data on a single Cat6 cable up to 150 ft (46 meters). HDMI audio is extracted and is provided both as analog stereo and multi-channel digital. The EX-HDU can also be used to control other equipment by providing programmable contact closure I/O, RS-232 output, IR output, and optional LAN interface with internal WebGUI and IP control.

    Functional Block Diagram

    The EX-HDU extender consists of an EX-HDU-WP single-gang wall plate transmitter and an EX-HDU-R (or EX-HDU-R-IP) receiver. They connect using standard CAT5e/6 UTP cabling up to 150 feet (46 Meters) long.

    The wall-plate Sender gets its power from the Receiver via the same UTP cable and does not need a separate power supply. For convenience, the wall plate features a USB hub with two USB ports for connection of USB devices. The plug-and-play extender is compatible with all PCs, MACs, and Android Tablets and does not require driver installation. Simply plug the PC's HDMI and USB ports to the sender and make them available at the remote receiver.

    The Receiver provides HDMI video output, stereo audio output, 4 USB ports, IR output, and a terminal strip that has RS-232 output plus 4 programmable digital I/O ports. A mini-USB port is also provided for configuration upload from a PC for cases where the Receiver is used also as a control system.

    Users can upload RS-232 commands to the EX-HDU to control other equipment such as turning a projector on and off. Commands can be triggered automatically by detecting video, or manually via the internal WebGUI, or by sensing open and close contact events on the I/O ports. For example, a simple toggle switch can be connected remotely to activate RS-232 commands for turning a projector on and off. The I/O ports can be configured to act as INPUTS or OUTPUTS. When an I/O port is configured as OUTPUT, it can trigger relays, for example to lower or raise a motorized projector screen.

    Under the Downloads tab above, a free PC software is available for configuring the system and to upload control commands.

    Introductory Video

    Receiver with IP connectivity is the model EX-HDU-R-IP. It provides an ETHERNET port for control via IP commands or internal webpage.

    WebGUI Example
    Example of WebGUI control (for units with IP interface)

    • Extends HDMI + USB 2.0 to 150 ft (46 m) on one Cat 6 cable
    • Wall plate sender has 2-port hub for connection to USB devices to the host PC
    • Receiver provides HDMI, 4 USB ports, plus contact-closure I/O and RS-232 for display control
    • HDMI Audio Extracted output (L/R analog) on Receiver
    • Perfect for Interactive displays, Soft CODECs, and KVM extension
    • Wall plate does not require separate power supply
    • Receiver has IP (LAN) connectivity with WebGUI control
    Video Standards

    DVI (Single Link)
    HDMI 1.4
    HDCP 1.1

    SIgnal Type

    TMDS

    Connectors

    EX-HDU-WP
    (1) HDMI Input
    (1) Type B USB Host PC Connection
    (2) Type A USB hub port Extension

    EX-HDU-R
    (1) HDMI Output
    (4) Type A USB hub port Extension
    (1) Mini-B USB for configuration

    Resolutions

    DVI – VGA (640×480) thru WUXGA (1920×1200)
    HDTV – 480p thru 1080p60
    (no interlaced support)

    USB Standards

    Compatible with USB 2.0 and all previous USB standards and data rates.

    Audio Format

    LPCM 2 Channel Audio (32-192kHz sample rate)

    Power Supply

    100 to 240 VAC, 47-63 Hz, External; 12VDC

    Temperature/Humidity

    Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, non-condensing
    Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, non-condensing

    Cooling

    Convection

    Enclosure

    Metal (Steel)

    Dimensions

    EX-HDU-WP – 2.60″ H x 1.30″ W x 1.80″ D (66mm H x 33mm W x 46mm D)
    EX-HDU-R – 1.18″ H x 4.13″ W x 4.57″ D (30mm H x 105mm W x 116mm D)
    Depth includes mounting flanges

    Weight

    Model Only
    EX-HDU-WP – 0.75 lb
    EX-HDU-R – 1.20 lb
    Shipping
    EX-HDU-WP – 1.25 lb
    EX-HDU-R – 1.70 lb
    EX-HDU-WP + EX-HDU-R – 2.50 lb

    Vibration

    ISTA 1A in carton (International Safe Transit Association)

    Safety

    CE

    EMI/EMC

    CE, FCC Class A

    MTBF

    90,000 hours (Calculated Estimate)

    Warranty

    3 years parts and labor

    Spec Sheets Versions Last Updated
    EX-HDU Spec Sheet

    JUNE 24, 2020
    Manuals Versions Last Updated
    EX-HDU GUI Insert

    JUNE 24, 2020
    Manuals Versions Last Updated
    EX-HDU Manual

    JUNE 24, 2020
    Software Versions Last Updated
    EX-HDU GUI

    JUNE 24, 2020
    Additional Downloads Versions Last Updated
    Screen Up/Down control

    JUNE 24, 2020