ECHO-RX2

HDBaseT™ Receiver with dual outputs

  • HDBaseT receiver w/dual HDMI outputs
  • Extend UHD 4K@60Hz 4:4:4 up to 70m & 1080p up to 100m
  • HDCP 2.2, HDR10, 3D support
  • Bi-directional RS-232 and IR control
  • Audio extraction
  • EDID management
  • Locking power supply connector

Accessories

ECHO-1S

1 Channel HDBaseT™ Sender

Read More

ECHO-4S

4 Channel HDBaseT™ Splitter (Sender)

Read More

ECHO-8S

8 Channel HDBaseT™ Splitter (Sender)

Read More

HDBaseT Receiver with dual outputs
With:
2x HDMI Mirror Outputs
Analog Audio Extraction

The ECHO family is a series of extension products designed to allow a single HDMI 2.0 source to display remotely at up to eight different locations, using HDBaseT technology. HDMI resolutions up to 4K UHD (4K@60 4:4:4) can be extended up to 70m, while resolutions up to 1080p can be extended 100m over a single CAT5e or CAT6 cable. The ECHO family supports HDCP 2.2 and 1.4 content protection, as well as HDR10 high dynamic range video.

In addition to HDMI extension, the ECHO family also extends RS-232 serial data, and bi-directional IR for control of remote devices. All senders include a local HDMI output, EDID routing control, de-embedded analog audio, and Power over Cable (PoC) to power remote receivers. The ECHO-4S and ECHO-8S have built-in HDMI splitters to extend a single video to four and eight receivers respectively and have additional features including RS-232 and IR loop output for daisy-chaining Senders, and digital TOSLINK audio de-embedding.

The ECHO-RX2 receiver has a built-in HDMI splitter for connection to a secondary display, RS-232 and bi-directional IR for control, and de-embedded analog audio output. When used with an ECHO-1S, install the power supply at either sender or receiver – whichever is more convenient.

For more information about product compatibility, please follow the link below to the Product Selection Chart.

HDBaseT Compatibility Chart

  • HDBaseT receiver w/dual HDMI outputs
  • Extend UHD 4K@60Hz 4:4:4 up to 70m & 1080p up to 100m
  • HDCP 2.2, HDR10, 3D support
  • Bi-directional RS-232 and IR control
  • Audio extraction
  • EDID management
  • Locking PoC connector
Video Standards

HDMI 2.0 video specifications including HDR10, 3D video
HDCP 2.2, 1.4
DVI (single link)

Video Connectors

ECHO-1S – (1) HDMI Input, (1) HDMI Output
ECHO-4S – (1) HDMI Input, (1) HDMI Output
ECHO-8S – (1) HDMI Input, (1) HDMI Output
ECHO-RX2 – (2) HDMI Outputs

Resolutions

HDTV signal – 480p through 4K@60 4:4:4
DVI signal VGA (640×480) thru WUXGA (1920×1200)

Audio

All HDMI Embedded audio including: LPCM 7.1, Dolby TrueHD, and DTS-HD Master Audio (32-192 kHz sample rate)

Other Signals

RS-232
ECHO-1S, ECHO-RX-2
(1) RX, TX and GND on Terminal Strip
RS-232 pass-through

ECHO-4S, ECHO-8S
(2) RX, TX and GND on Terminal Strip (Input and Loop Output)
RS-232 Input Baud Rate: 115200, N, 8, 1 for configuration otherwise pass-through
RS-232 Output to ECHO-RX2 Baud Rate: pass-through

IR

Wide-band IR pass-through: 38 – 56 kHz supported

ECHO-1S, ECHO-RX-2
(1) 3.5mm IR Input
(1) 3.5mm IR Output

ECHO-4S, ECHO-8S
(2) 3.5mm IR Inputs (Input and Loop)
(2) 3.5mm IR Outputs (Input and Loop)

USB

USB USB 2.0 Micro type B (for firmware update only)

General

Power Supply
100 VAC to 240 VAC, 47-63 Hz, External; 24 VDC

ECHO-1S
24 VDC 1A

ECHO-4S
24 VDC 4A

ECHO-8S
MAIN: 24 VDC 2A
PoC: 24 VDC 4A

Temp/Humidity

Storage: -40 to +158°F (-40 to +70°C) / 5% to 90%, non-condensing
Operating: +14 to +131°F (-10 to +55°C) / 5% to 90%, non-condensing

Typical Power Consumption

ECHO-1S & ECHO-RX2 = 12W total
ECHO-4S & ECHO-RX2 = 15W (Sender) 30W (PoC)
ECHO-8S & ECHO-RX2 = 36W (Sender) 60W (PoC)

Cooling

Convection

Enclosure type

Metal (Steel)

Dimensions

ECHO-1S – 0.82” H x 6.06” W x 3.09” D (22.8mm H x 153.9mm W x 78.5mm D)
ECHO-4S – 1.74” H x 10.64” W x 7.46” D (44.2mm H x 270mm W x 189.5mm D)
ECHO-8S – 1.72” H x 18.9” W x 7.46” D (43.7mm H x 480mm W x 189.5mm D)
ECHO-RX2 – 0.82” H x 6.06” W x 3.09” D (22.8mm H x 153.9mm W x 78.5mm D)
(All dimensions include mounting flange width)

Weight

Product
Shipping

Safety

CE

EMI/EMC

CE, FCC Class A

MTBF

90,000 hours (estimate)

Warranty

3 years parts and labor

Manuals Versions Last Updated
Echo Family Users Manual

JUNE 24, 2020
Spec Sheets Versions Last Updated
ECHO-RX2 Spec Sheet

2.0 JUNE 24, 2020