discontinued

210-LU

2-Port RGBHV Splitter with Universal Sync Input

  • Rugged, Reliable, Economical
  • Automatically detects and accepts all input sync modes
  • 300 MHz Bandwidth
  • Powered from AC adapter or 5 VDC
  • Each output can independently generate composite sync
  • LED power indicator
Request a Quote

The Model 210-LU buffers and splits component (RGBHV, RGBS, or RGsB) video signals for display on two monitors. The unit can drive video cables up to 150 feet or longer depending on the resolution used and cable quality.

The input video signal can be RGBHV (five connections, separate syncs), or RGBS (four connections, composite sync), or RGsB (sometimes referred to RGB - three connections, with sync-on-green).
The device is capable of outputting separate, composite, or sync-on-green based on a switch setting independently for each output. For example you can set output # 1 for separate sync and output 2 for sync-on-green regardless of the type of sync at the input. The Model 210-LU can be powered from a supplied power adapter, or from customer supplied +5V DC.

  • Rugged, Reliable, Economical
  • Automatically detects and accepts all input sync modes
  • 300 MHz Bandwidth
  • Powered from AC adapter or 5 VDC
  • Each output can independently generate composite sync
  • LED power indicator
  • BNC connectors on input and outputs
  • Mounting holes for attachment in user equipment
Analog inputs

3 BNC type labeled RED, GREEN, BLUE

Input impedance: 75 ohm, voltage level: 3 vp-p max, 1 vp-p nominal
Sync inputs

2 BNC type labeled HOR, VERT
Input impedance: 2 k ohm, voltage level: 0 – 5 v max, TTL
Analog Outputs

2 independent channels, 3 BNC’s each
Output impedance: 75 ohm, short circuit protected, level: 1 vp-p nominal with termination
Sync Outputs

2 TTL line driver BNC outputs per channel
level: TTL compatible
Video Amplifier

Greater than 300 Megahertz bandwidth, DC coupled
Composite Sync

TTL on the HOR output, or sync-on-green depending on switch position
Comp sync polarity

Negative
Input Power

6vDC grounded adapter for units with dual power input capability, or +5v DC grounded regulated power supply on Molex connector
Physical Consumption

1.2 watts maximum
Physical

8.88 x 3.13 x 1.35 inch (excluding connectors & mounting bracket) – weight: 1.2 lb
Manuals Versions Last Updated
210-LU Mnual

JUNE 24, 2020

Related Products