discontinued
UHBX-3S
HDMI on HDBaseT 1x3 Splitter
- Extend HDMI video to 3 remote displays using HDBaseT
- Use a single UTP cable to extend video to 100 meters (330 ft)
- Can send 1080p to 150 meters (500 ft) to Long Reach capable receivers
- Supports virtually all HDMI and DVI resolutions
- Local HDMI output for direct connection to a local display
- EDID management with USB port for EDID manipulation using a PC
** UHBX-3S is discontinued and replaced with ECHO-4S **
The UHBX-3S is an HDMI splitter with one local HDMI output and 3 HDBaseT outputs for extension to compatible receivers up to 150 meters using a single UTP. The Splitter supports HDCP, 3D, Deep Color and CEC. EDID management is integrated into the unit with "Pass-thru", "Learn", and "Emulate" features. Advanced users can use the USB port to download, edit, and upload EDID data to and from the device. The unit provides an RS-232 port that can individually address and control remote displays that feature RS-232 interface. The UHBX-3S provides convenient front panel LED status indicators for all HDBaseT parameters to quickly verify proper operation.
The UHBX-3S supports PoH (Power over HDBaseT). Compatible receivers are powered from the sender using PoH standard so no additional power supplies are needed. The HDBaseT compliant PoH performs all necessary low voltage handshakes prior to injecting supply on the UTP line for maximum reliability, safety, and compliance.
Compatible receivers include the economical UH-1BT-R & UH-1BTX-R for HDMI only OR UHBX-R-PD that supports RS-232, PoH, and Long Reach modes.
For best results we recommend using Alliance approved cables listed at this site.
For more information about our other HDBaseT products please follow the link below to the Product Selection Chart.
 |
InfoComm: UHBX-3S (1:43 min) |
- Extend HDMI video to 3 remote displays using HDBaseT
- Use a single UTP cable to extend video to 100 meters (330 ft)
- Can send 1080p to 150 meters (500 ft) to Long Reach capable receivers
- Supports virtually all HDMI and DVI resolutions
- Local HDMI output for direct connection to a local display
- EDID management with USB port for EDID manipulation using a PC
- RS-232 port for sending commands to remote displays
- Power-over-HDBaseT meets IEEE 802.3af standard
| Input Port | 1x HDMI Female (Type A) |
| Output Port | 1x HDMI Female (Type A), 3 RJ45 connectors |
| Standards | DVI (single link) and HDMI (compliant with HDMI 1.4 video specifications including 12 bit color depth and 3D video) |
| Signal Type | HDBaseT |
| Connectors | Locking HDMI |
| Video Resolutions | DVI signal VGA (640×480) thru WUXGA (1920×1200) |
| Audio Formats | All HDMI Embedded Audio including: LPCM 7.1CH, Dolby TrueHD and DTS-HD Master Audio (32-192kHz sample rate) |
| DDC | Pass-Thru DDC for reading EDID directly from remotely connected LCD and HDCP handshake |
| CEC | Pass-Thru CEC for Consumer Electronics Control compatible devices |
| RS232 | Bidirectional (full-duplex) any baud rate up to 115,200 |
| PoH | Power-over-HDBaseT meets IEEE 802.3af standard. PD side identifies as Class 2 (3.846.49 watts). Actual power consumption of PD side is 5.5 watts max |
| Power Supply | 100 VAC to 240 VAC, 50-60 Hz, external; 48VDC 1.5A, for internal & PoH |
| Power | Sender: 10.15 watts maximum |
| Temp/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, non-condensing |
| Cooling | Convection |
| Mounting | Threaded nuts on bottom for rack-shelf mounting or optional rack ears |
| Enclosure Type | Metal (Aluminum ends, Aluminum Extrusion) |
| Dimensions | 1.66″ H x 8.42″ W x 5.59″ D (42mm H x 214mm W x 141mm D) |
| Product Weight | Product 2.5 lbs (0.386kg) |
| Vibration | ISTA 1A in carton (International Safe Transit Association) |
| Safety | CE |
| EMI/EMC | CE, FCC Class A |
| MTBF | 90,000 hours (Calculated Estimate) |
| Warranty | 3 years parts and labor |
| Spec Sheets | Versions | Last Updated | |
|---|---|---|---|
|
|
UHBX-3S Spec Sheet
|
JUNE 24, 2020 | |
| Spec Sheets | Versions | Last Updated | |
|
|
UHBX-3S Spec Sheet
|
JUNE 24, 2020 | |
| Manuals | Versions | Last Updated | |
|
|
UHBX-3S Manual
|
JUNE 24, 2020 | |
| Manuals | Versions | Last Updated | |
|
|
UHBX-3S Software Guide
|
JUNE 24, 2020 | |
| Software | Versions | Last Updated | |
|
|
UHBX-3S GUI V1.2
|
JUNE 24, 2020 | |
| Additional Downloads | Versions | Last Updated | |
|
|
UHBX-3S Dimensional DXF
|
JUNE 24, 2020 | |
| Additional Downloads | Versions | Last Updated | |
|
|
UHBX-3S Dimensional PDF
|
JUNE 24, 2020 | |
Related Products
-
UHB-SW2 (Kit)
Read moreUHB-SW2 (Kit)
Model UHB-SW2-WP
(x1) 2-Gang HDBaseT transmitter (UHB-SW2-WP)
(x1) Phoenix connector (2-pin)
(x1) Phoenix connector (3-pin)
(x1) IR detector (wideband)
(x1) IR emitter (wideband)Model UHB-R
(x1) HDBaseT receiver (UHB-R)
(x1) Phoenix connector (2-pin)
(x1) Phoenix connector (3-pin)
(x1) IR detector (wideband)
(x1) IR emitter (wideband)
(x1) Power Supply -
UHB-SW2-WP
Read moreUHB-SW2-WP
Model UHB-SW2-WP
- (x1) 2-Gang HDBaseT transmitter (UHB-SW2-WP)
- (x1) Phoenix connector (2-pin)
- (x1) Phoenix connector (3-pin)
- (x1) IR detector (wideband)
- (x1) IR emitter (wideband)
-
EX-LYNX-WP-TX
Read moreEX-LYNX-WP-TX
Lynx is a maximum value extension solution for high resolution 4K graphics requiring smooth video playback and audio de-embedding at a value price point.
Cascade up to 8 receivers to scale functionality and maximize distribution distance.Ideal Applications: K-12 & Higher Ed, meeting spaces of all sizes, hospitality, and digital signage applications for up to 8 displays.
-
EX-LYNX-WPE-TX
Read moreEX-LYNX-WPE-TX
HDMI Over CAT6 Extender Family
Lynx is a maximum value extension solution for high resolution 4K graphics requiring smooth video playback and audio de-embedding at a value price point.
Cascade up to 8 receivers to scale functionality and maximize distribution distance.Ideal Applications: K-12 & Higher Ed, meeting spaces of all sizes, hospitality, and digital signage applications for up to 8 displays.
