discontinued
UVB1-CP
Component Video (YPbPr) Active Balun Extension Kit for SD / HDTV
- Transmits component video (YPbPr) over CAT 5 cable
- Up to 1000 feet (depending on the resolution)
- Only one power supply required
- Wide bandwidth differential amplifiers for unprecedented sharp and clean image
- Ground-loop Isolation (GLI) and RFI (radio frequency interference) immunity
- Active design impedance matching for no image ghosting
**Model UVB1-CP has been Discontinued. As an alternative, we recommend model UV1**
This product is used to boost & extend a standard or HDTV Component Video (YPbPr) signal on Cat5 cable up to 1,000 ft.
The kit includes a sender (UVB1-CP-S) and a receiver (UVB1-CP-R) together with high quality cables for both ends. A single power supply is also provided that can be plugged into either end.
Unlike other passive Baluns this device is active and boosts the signal using wide bandwidth (450 MHz) differential (balanced) amplifiers for an unprecedented sharp and clean image.
The unit provides Ground-loop Isolation (GLI) and RFI (radio frequency interference) immunity to prevent 60 cycle video hum or distortion. Most competing Baluns provide no common mode rejection at low frequencies and are subject to facility grounding issues and noise pickup.
The active design matches the impedance of the UTP cable perfectly at all frequencies so that there is no image ghosting. Ghosting is a major issue with competing passive Baluns transmitting HD signals.
- Transmits component video (YPbPr) over CAT 5 cable
- Up to 1000 feet (depending on the resolution)
- Only one power supply required
- Wide bandwidth differential amplifiers for unprecedented sharp and clean image
- Ground-loop Isolation (GLI) and RFI (radio frequency interference) immunity
- Active design impedance matching for no image ghosting
| Standards | Analog Component Video YPbPr or RGB signals with sync-on-green |
| Resolution | All Standard TV and HDTV from 480i to 1080p |
| Video Level | 1.0 volt p-p on Y and 0.7 v p-p on Pb and Pr |
| Bandwidth | 20 Hz to 450 MHz |
| Common Mode Noise Rejection | 100 dB @ 60 Hz, 70 dB @ 1 MHz, 50 db @ 10 MHz |
| Max Distance | Up to 1000 ft. (305 meters) @ 480i or 576i |
| Temperature | Operating: 32 to 122 Deg F (0 to 50 Deg C) Storage: -40 to +185 Deg F (40 to +85 Deg C) |
| Enclosure | Enclosure Black Plastic ABS-94VO, UL File#56070 |
| MTBF | 100,000 hours (calculated estimate) |
| Manuals | Versions | Last Updated | |
|---|---|---|---|
|
|
UVB1-CP Manual
|
JUNE 24, 2020 | |
Related Products
-
UH18 (Kit)
Read moreUH18 (Kit)
Model UH18-S
- (x1) UH18-S
- (x2) Side Brackets and screws
- (x1) 3 pin terminal strip
- (x1) IR Emitter Cable
- (x1) USB Type A to Type B
- (x1) USB Micro USB to Type A
- (x1) 24 VDC Power Supply with adapters
- (x1) User Manual Card
Model UH18-R
- (x1) UH18-R
- (x2) Side Brackets and screws
- (x1) 3 pin terminal strip
- (x1) IR Detector Cable
- (x1) User Manual Card
-
UH18-S
Read moreUH18-S
Model UH18-S
- (x1) UH18-S
- (x2) Side Brackets and screws
- (x1) 3 pin terminal strip
- (x1) IR Emitter Cable
- (x1) USB Type A to Type B
- (x1) USB Micro USB to Type A
- (x1) 24 VDC Power Supply with adapters
- (x1) User Manual Card
-
EX-LYNX-WP-TX
Read moreEX-LYNX-WP-TX
Lynx is a maximum value extension solution for high resolution 4K graphics requiring smooth video playback and audio de-embedding at a value price point.
Cascade up to 8 receivers to scale functionality and maximize distribution distance.Ideal Applications: K-12 & Higher Ed, meeting spaces of all sizes, hospitality, and digital signage applications for up to 8 displays.
-
EX-LYNX-WPE-TX
Read moreEX-LYNX-WPE-TX
HDMI Over CAT6 Extender Family
Lynx is a maximum value extension solution for high resolution 4K graphics requiring smooth video playback and audio de-embedding at a value price point.
Cascade up to 8 receivers to scale functionality and maximize distribution distance.Ideal Applications: K-12 & Higher Ed, meeting spaces of all sizes, hospitality, and digital signage applications for up to 8 displays.
