discontinued

UVB1-CP-S

Component Video (YPbPr) Active Balun Sender for SD / HDTV

  • Transmits component video (YPbPr) over CAT 5 cable
  • Up to 1000 feet (depending on the resolution)
  • Only one power supply required
  • Wide bandwidth differential amplifiers for unprecedented sharp and clean image
  • Ground-loop Isolation (GLI) and RFI (radio frequency interference) immunity
  • Active design impedance matching for no image ghosting
Request a Quote

** UVB1-CP-S is discontinued and the UV1 is recommended as a substitution for the UVB1-CP-S. **

This product is used to boost & extend a standard or HDTV Component Video (YPbPr) signal on Cat5 cable up to 1,000 ft.

In a typical installation 2  units are required, one as a sender (UVB1-CP-S) and one as a receiver (UVB1-CP-R). They are also sold as a kit (see Model UVB1-CP).

The sender includes a power supply which powers both ends (receiver is powered through the Cat5 cable).

Unlike other passive Baluns this device is active and boosts the signal using wide bandwidth (450 MHz) differential (balanced) amplifiers for an unprecedented sharp and clean image.

The unit provides Ground-loop Isolation (GLI) and RFI (radio frequency interference) immunity to prevent 60 cycle video hum or distortion. Most competing Baluns provide no common mode rejection at low frequencies and are subject to facility grounding issues and noise pickup.

The active design matches the impedance of the UTP cable perfectly at all frequencies so that there is no image ghosting. Ghosting is a major issue with competing passive Baluns transmitting HD signals.

  • Transmits component video (YPbPr) over CAT 5 cable
  • Up to 1000 feet (depending on the resolution)
  • Only one power supply required
  • Wide bandwidth differential amplifiers for unprecedented sharp and clean image
  • Ground-loop Isolation (GLI) and RFI (radio frequency interference) immunity
  • Active design impedance matching for no image ghosting
Standards

Analog Component Video YPbPr or RGB signals with sync-on-green
Resolution

All Standard TV and HDTV from 480i to 1080p
Video Level

1.0 volt p-p on Y and 0.7 v p-p on Pb and Pr
Bandwidth

20 Hz to 450 MHz
Common Mode Noise Rejection

100 dB @ 60 Hz, 70 dB @ 1 MHz, 50 db @ 10 MHz
Max Distance

Up to 1000 ft. (305 meters) @ 480i or 576i
Up to 750 ft (229 meters) @ 480p or 576p
Up to 500 ft (152 meters) @ 720p or 1080i
Up to 300 ft (91 meters) @ 1080p
Temperature

Operating: 32 to 122 Deg F (0 to 50 Deg C)
Storage: -40 to +185 Deg F (40 to +85 Deg C)
Enclosure

Enclosure Black Plastic ABS-94VO, UL File#56070
MTBF

100,000 hours (calculated estimate)
Manuals Versions Last Updated
UVB1-CP-S Manual Manual

JUNE 10, 2023

Related Products