UV232B-R

VGA & Bi-Directional RS-232 Receiver

  • Sends PC or HD video and bi-directional RS-232 over single Catx
  • Compensation for UTP cable to 500 ft
  • No power supply required at local sender – when powered from VESA compliant VGA Source
  • DDC compliant EDID emulation on the Sender
  • Supports all baud rates to 115 Kbps
  • Perfect for touch-screen, Kiosk, or Projector Control applications

The Model UV232B-R is used to send high resolution video and full-duplex RS-232 over a single twisted-pair cable to a remote location up to 500 feet away.
This is the RECEIVER part of the kit.
The input video can be from a RGBHV (PC video to WUXGA) or YPbPr (HD analog component to 1080p).

DDC compliant EDID emulation assures proper PC boot-up with video output.

The Bi-directional RS-232 can be used to control LCD’s or Projectors that have RS-232 control, or connect to a compatible touch-screen LCD.

Applications include kiosk solutions, conference halls, digital signage, interactive operator systems, factory or laboratory data acquisition and control, and more.

When the Sender is powered from a VESA compliant VGA source (+5v on Pin 9) a power supply (included) is only required at the Receiver.
If the source is not VESA compliant in that regard, or if the video is YPbPr (using a 3 RCA to HD15 input cable), then a power supply (included) is needed at both Sender and Receiver.

The kit includes a local unit (Receiver) with power supply.

It is recommended that for best image quality low-skew UTP cables be utilized (such as Hall Research’s Zero-Skew cables), otherwise at long distances (>200ft) and high-resolutions, RGB skew may be present and a separate skew corrector would be necessary (HRT Model SKU-RGB).

 

  • Sends PC or HD video and bi-directional RS-232 over single Catx
  • Compensation for UTP cable to 500 ft
  • No power supply required at local sender – when powered from VESA compliant VGA Source
  • DDC compliant EDID emulation on the Sender
  • Supports all baud rates to 115 Kbps
  • Perfect for touch-screen, Kiosk, or Projector Control applications
  • RS-232 and high quality VGA input cables provided (w Sender)
  • Compact metal enclosure with mounting provisions
  • Compact, Rugged, Reliable, and Economical
  • Made in USA
Standards

Analog VGA Video (RGBHV), YPbPr, or RGB signals with sync-on-green.

Resolutions

All up to WUXGA (1920×1200/60 Hz, YPbPr Analog Component upto 1080p

Video Level

0.7 v p-p on RGB, 5v p-p H/V sync

Bandwidth

20 Hz to 450 MHz

Common Mode Noise Rejection

100 dB @ 60 Hz, 70 dB @ 1 MHz, 50 db @ 10 MHz

Max Distance

Up to 500 ft. (152 meters) based on resolution

Temperature

Operating: 32 to 122 Deg F (0 to 50 Deg C);
Storage: -40 to +185 Deg F (-40 to +85 Deg C)

Enclosure

Aluminum

MTBF

100,000 hours (calculated estimate)

Power

Via the included power adapter. Voltage: 6v DC Center-Positive. Average Power Consumption: 200mA (Sender) 160mA (Receiver)

Size (H x W x D)

1.25” H x 2.75” W x 3.08” D* Each Device
*Units have 2 mounting ears that protrude 0.40” beyond the main box on each side.

RS232 Connections

Pin 2 = RX
Pin 3 = TX
Pin 5 = GND

Spec Sheets Versions Last Updated
UV232B Spec Sheet

JUNE 24, 2020
Manuals Versions Last Updated
UV232B Manual

JUNE 24, 2020