The Model UV232A Kit is used to send high resolution video, Audio (L+R Mixed) and uni-directional RS-232 over a single twisted-pair cable to a remote location up to 500 feet away.
This is the SENDER part of the kit.
The input video can be from a RGBHV (PC video to WUXGA) or YPbPr (HD analog component to 1080p).
DDC compliant EDID emulation assures proper PC boot-up with video output.
The Uni-directional RS-232 can be used to control LCD’s or Projectors that have RS-232 control.
Applications include kiosk solutions, conference halls, digital signage, interactive operator systems, factory or laboratory data acquisition and control, and more. When the Sender is powered from a VESA compliant VGA source (+5v on Pin 9) a power supply (included) is only required at the Receiver. If the source is not VESA compliant in that regard, or if the video is YPbPr (using a 3 RCA to HD15 input cable), then a power supply (included) is needed at both Sender and Receiver.
The kit includes a local unit (Sender) that includes a VGA & serial cables, plus a remote unit (Receiver) with two power supplies.
It is recommended that for best image quality low-skew UTP cables be utilized (such as Hall Research’s Zero-Skew cables), otherwise at long distances (>200ft) and high-resolutions, RGB skew may be present and a separate skew corrector would be necessary (Model SKU-RGB).
|Standards||Analog VGA Video (RGBHV), YPbPr, or RGB signals with sync-on-green.|
|Resolutions||All up to WUXGA (1920x1200 / 60Hz), 1080p|
|Video Level||0.7 v p-p on RGB, 5v p-p H/V sync|
|Bandwidth||20 Hz to 450 MHz|
|Common Mode Noise Rejection||100 dB @ 60 Hz, 70 dB @ 1 MHz, 50 db @ 10 MHz|
|Max Distance||Up to 500 ft. (152 meters) based on resolution|
|Temperature||Operating: 32 to 122 Deg F (0 to 50 Deg C);
Storage: -40 to +185 Deg F (-40 to +85 Deg C)
|MTBF||100,000 hours (calculated estimate)|
|Power||Via the included power adapter. Voltage: 6v DC Center-Positive. Average Power Consumption: 200mA (Sender) 160mA (Receiver)|
|Size (H x W x D)||1.25” H x 2.75” W x 3.08” D* Each Device
*Units have 2 mounting ears that protrude 0.40” beyond the main box on each side.
|RS232 Connections||Pin 2 = RX
Pin 3 = TX
Pin 5 = GND
Copyright © 2022 Hall Technologies - All Rights Reserved.