UH18-S

4K Video and USB HDBaseT 2.0 Extender (Sender + Receiver)

Model UH18-S

(x1) UH18-S
(x2) Side Brackets and screws
(x1) 3 pin terminal strip
(x1) IR Emitter Cable
(x1) USB Type A to Type B
(x1) USB Micro USB to Type A
(x1) 24 VDC Power Supply with adapters
(x1) User Manual Card

REQUEST A QUOTE

Description

The UH18 extends HDMI Video, USB, IR, and RS-232 on a single CAT6 cable to over 100 meters. It is perfect for allowing access to a PC from a remote user location and can be used to place the PC in a secure location away from the user station. The Sender provides local HDMI loop output as well as a USB hub so users can access the PC locally as well as from a remote station.

The extender kit consists of a Sender (UH18-S) and Receiver (UH18-R). Power, USB, RS-232 and IR (remote) signals are extended on the same cable. The power supply can be connected at either end of the extender. The UH18 provides 18 Gbps video bandwidth and supports HDMI resolutions up to and including 4K @ 60 Hz 4:4:4 (UHD). The Sender has a built in video splitter and features a convenient local HDMI video output connector. USB 2.0 extends from a USB host connected at the Sender. Both the Sender and the Receiver have USB hubs with two USB device ports for connecting USB devices such as a keyboard, mouse, touch screen, printer, flash drive, web cam or other USB 1.1/2.0 device. The extender kit also provides a user selectable “LONG REACH” mode. In this mode, the extender kit can support distances to 150 meters (500 feet) with a maximum resolution of 1920x1080 (1080p). For extra convenience the remote receiver de-embeds HDMI audio and provides both analog (L/R stereo on 3.5mm jack) as well as digital SPDIF via RCA. This is a perfect for connecting a pair of speakers at the remote location using the Hall Research AMP-4840 audio amplifier.

Features

Extends 4K@60Hz up to 100 m and 1080p@60Hz up to 150m
HDMI 2.0, HDCP 2.2 compliant and supports HDR10
Perfect for KVM Extension (accessing a PC from a remote location)
HDMI loop-output on the Sender
Audio Extraction on the Receiver(Analog and SPDIF)
Support LPCM 7.1, DTS-HD, Dolby-HD
Fully compliant with HDBaseT™ 2.0 specifications
Bi-directional IR and RS-232 Pass through
Plug and Play Installation - takes minutes to setup
EDID Management
Only one power supply needed (power is sent over UTP cable to other side)
Perfect for Server Rooms with local and remote access to the PCs

Block Diagram

Specifications

Video	Standards HDMI 1.4/2.0 and HDCP 1.4/2.2 Resolutions DTV/HDTV up to 4K@60 YUV 4:4:4
Audio	HDMI LPCM 2/5.1/7.1CH, Dolby Digital 2~5.1CH, DTS 2~5.1CH, Dolby TrueHD and DTS-HD Master Audio Extraction Analog (Line Level) and SPDIF Note: Analog output is only active when the HDMI Audio is 2-channel. SPDIF output is always active regardless of audio format of 2.0, 5.1 or 7.1 channels
Peripherals	RS-232 Full Duplex Pass-through at any baud rate USB Supports all USB 2.0/1.1 Devices IR Bi-directional Pass-through 56K carrier
Power	Input 100-240 VAC, 50-60 Hz 0.8 A (US/EU Standard, CE/FCC/UL Certified) Output 24 VDC @ 1.0 A Consumption 14 Watts Type DAL POC (Power only required at one end)
Temperature	Storage: +32 to +140 °F (0 to 40 °C) / 5% to 90%, non-condensing Operating: +32 to +104 °F (0 to 40 °C) / 5% to 90%, non-condensing
Enclosure	Metal (Steel)
Dimensions	6.87” (172.4 mm) W × 4.45” (113.2 mm) D × 0.95” (24 mm) H All protrusions included
Weight	Product 1.3 Lbs Shipping 5.2 Lbs (Sender + Receiver)
Safety	CE
EMI/EMC	CE, FCC Class A
MTBF	90,000 estimated
Warranty	3 years parts and labor

Downloads

Manuals		Versions	Last Updated
	UH18 Manual		JUNE 24, 2020
Spec Sheets		Versions	Last Updated
	UH18 Spec Sheet		NOVEMBER 12, 2021

Accessories

CIR-KIT-EMT2

IR Emitter Cable and Cover

UH18-S

UH18-S

4K Video and USB HDBaseT 2.0 Extender (Sender + Receiver)

Description

Features

Block Diagram

Specifications

Downloads

Accessories

CIR-KIT-EMT2

CIR-DET-P2

AMP-4840_HallResearch