discontinued
UH-BTX
HDMI over UTP Extender with HDBaseT (HDBaseT) Sender & Receiver
- Extend HDMI or DVI over single Cat 5e/6 up to 330 ft (100 m)
- Optional Long Reach mode (BTX Only) to extend 1080p up to 492 ft / 150 m.
- Utilizes HDBaseT Class B extension technology
- Can connect to all HDBaseT and HDBaseT-Lite compliant products
- Full HD support for 1080p deep color, 3D, and 4K UHD
- HDCP Compliant with pass-thru EDID from display back to source
This HDBaseT extension kit is comprised of a compact Sender (UH-BTX-S) and corresponding Receiver (UH-BTX-R).
The UH-BT and UH-BTX are a family of HDBaseT compliant Senders and Receivers used to extend uncompressed HDMI video and RS-232 control signals up to 230 ft (-BT models) or 328 ft (-BTX models) over a single CAT5e/CAT6 UTP cable.
The extenders are comprised of a Sender (-S) and a Receiver (-R) and extend all PC and HD resolutions without compression, up to 4K UHD.
Full-duplex RS-232 extension is provided via 3-pin terminal blocks, supporting all baud rates up to 115,200 bps.
Note
The UH-BT and UH-BTX Senders and Receivers are compatible with each other; however the maximum distance achievable is dictated by the lower of the two - 230 ft / 70 m.
For best results we recommend using Alliance approved cables listed at this site.
For more information about the product compatibility follow the link below to the Product Selection Chart.
- Extend HDMI or DVI over single Cat 5e/6 up to 330 ft (100 m)
- Optional Long Reach mode (BTX Only) to extend 1080p up to 492 ft / 150 m.
- Utilizes HDBaseT Class B extension technology
- Can connect to all HDBaseT and HDBaseT-Lite compliant products
- Full HD support for 1080p deep color, 3D, and 4K UHD
- HDCP Compliant with pass-thru EDID from display back to source
- CEC pass-thru for simplified control among compatible devices
- Uncompressed digital video extension guarantees 100% fidelity
- Reliable, trouble free operation
- Plug and Play no user configuration required
- Sturdy, compact metal enclosure with mounting provisions
- Compatible with Locking HDMI connectors
- Universal Power Supplies with Locking connectors
- Designed and manufactured in USA
Max Distance | 330 ft (100m) |
Video Standards | DVI (single link) |
Connectors | UH-BT(X)-S |
Video Resolutions | DVI signal VGA (640×480) thru WUXGA (1920×1200) |
Audio | All HDMI Embedded Audio |
RS-232 | (1) RX, TX and GND on Terminal Strip. Supports all common baud rates including 1200, 2400, 4800, 9600, 19200, 38400, 57600, or 115200 |
DDC | Pass-Thru DDC for reading EDID directly from remotely connected display + HDCP handshake |
CEC | Pass-Thru Consumer Electronics Control (CEC) for compatible devices |
Power Supply | 100 VAC to 240 VAC, 50-60 Hz, external; 5 VDC, 2.0 A, regulated |
Temperature | Storage: -40 to 158 °F (-40 to 70 °C) |
Humidity | 10% to 90%, non-condensing |
Typical DC Current Draw | 5 VDC, 2.0 A Power Supply |
Cooling | Convection |
Dimensions | 1.18″ H x 2.75″ W x 3.85″ D |
Weight | Product: 0.75 lb (0.35 kg) |
Safety | CE |
EMI/EMC | CE, FCC Class A |
MTBF | 90,000 hours (estimate) |
Warranty | 3 years parts and labor |
Manuals | Versions | Last Updated | |
---|---|---|---|
|
UH-BT & UH-BTX Manual
|
JUNE 24, 2020 | |
Spec Sheets | Versions | Last Updated | |
|
UH-BT & UH-BTX
|
JUNE 24, 2020 |