HBX-S
HDMI Video Extender With Ultra-HD AV, IR, RS232 and Ethernet (Sender)
- Fully Compliant with HDBaseT standard
- Supports virtually all HDMI and DVI resolutions including 4K UHD
- Extends, Video, Audio, RS-232, IR, and Ethernet
- Supports extension to 100 m (330 ft)
- Fully isolates grounds between TX and RX sides
- Compact, Rugged, Reliable, and Economical
This product is a Class A HDBaseT compliant Sender (Transmitter) that supports a 100-meter Cat6 range and is used to extend HDMI, RS-232, IR, and Ethernet (100BaseT) up to 100 meters (328 feet) using a single Cat6 cable.
Since the product uses the HDBaseT standard, video is extended pixel-by-pixel with no compression or latency. The extender supports all PC and HDTV Resolutions including 4K @ 30 Hz 4:4:4 or 4K @ 60 Hz 4:2:0. The IR extension preserves the modulation (carrier) frequency thereby providing compatibility to most standards.
The HBX-S includes a universal 5v power supply. IR emitter and IR detector cables are also included.
Not compatible with the ECHO Family of products.
For more information about product compatibility, please follow the link below to the Product Selection Chart.
- Fully Compliant with HDBaseT standard
- Supports virtually all HDMI and DVI resolutions including 4K UHD
- Extends, Video, Audio, RS-232, IR, and Ethernet
- Supports extension to 100 m (330 ft)
- Fully isolates grounds between TX and RX sides
- Compact, Rugged, Reliable, and Economical
- Plug and play, no configuration needed
- Receiver can be powered via PoC from senders that provide PoC such as HSM-44-BX Matrix Switch with HDBaseT outputs
| Video Standards | DVI (single link) and HDMI (compliant with HDMI 1.4 video specifications including |
| Signal Type | TMDS |
| Resolutions | DVI signal – VGA (640×480) thru WUXGA (1920×1200) |
| Audio Formats | All HDMI Embedded Audio including: LPCM 7.1CH, Dolby TrueHD and DTS-HD |
| DDC | Pass-Thru DDC for reading EDID directly from remotely connected LCD and HDCP |
| CEC | Pass-Thru CEC for Consumer Electronics Control compatible devices |
| RS232 | Bidirectional (full-duplex) any baud rate up to 115,200 |
| Ethernet | 100BaseT Ethernet LAN |
| IR | Extended in both directions. Carrier modulation range from 30 kHz to 60 kHz |
| Power Supply | 100 VAC to 240 VAC, 50-60 Hz, external; 5 VDC, 2 A, regulated |
| Power | Sender & Receiver: 10 watts maximum |
| Temp/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, non-condensing |
| Cooling | Convection |
| Mounting | End plates with hole for surface mounting |
| Enclosure type | Metal (Aluminum ends, Aluminum Extrusion) |
| Dimensions | 1.0″ H x 3.9″ W x 3.9″ D (25mm H x 100mm W x 100mm D) |
| Product weight | Sender 9.3 oz (0.58 lb or 264 g) |
| Safety | CE |
| EMI/EMC | CE, FCC Class A |
| MTBF | 90,000 hours (Calculated Estimate) |
| Warranty | 3 years parts and labor |
| Manuals | Versions | Last Updated | |
|---|---|---|---|
|
|
HBX-S/HBX-R Manual
|
JUNE 24, 2020 | |
Related Products
-
HSM-44-BX
Read moreHSM-44-BX
- HDCP 2.2 and 4K UHD
- Simultaneous HDMI and HDBaseT on each output
- Extends HDMI, IR, RS-232, Ethernet, and Power on HDBaseT
- Intuitive front panel control with two-line LCD
- Analog and Digital Extracted Audio Outputs
- Uses Genesis Control Command Set (GCCS)
-
CHD-SF*
Read moreCHD-SF*
- Provides 18 Gb/s to support 4K UltraHD 60Hz video
- Available from 1 ft to 50 ft in length
- Increases retention force and ensures robust video connection
- Springy tabs on the top match slots in mating connectors
- Snaps in and can provide tactile and audible feedback
-
HBX-R
Read moreHBX-R
- Fully Compliant with HDBaseT standard
- Supports virtually all HDMI and DVI resolutions including 4K UHD
- Extends, Video, Audio, RS-232, IR, and Ethernet
- Supports extension to 100 m (330 ft)
- Fully isolates grounds between TX and RX sides
- Compact, Rugged, Reliable, and Economical
