Product NoticeWhile Supplies Last

511-POH-17W

511-POH-17W PoH Compliant Power Inserter

  • Self-contained HDBaseT Power Injector
  • 100-240VAC Universal Input
  • Desktop Style
  • IEEE802.3af Compliant
  • Load Diagnostic LED
  • Overload Shutdown and Short Circuit Protection
  • Share

Description

** 511-POH-17W is discontinued and replaced with 511-POH-30W **

** The 511-POH-30W is fully compatible and can be substituted for 511-POH-17W. **


**Model 511-POH-17W has been Discontinued. As an alternative, we recommend model 511-POH-30W.**

The 511-POH-17W is a PoH compliant power inserter that can be used to power one end of an HDBaseT™ link. It passes the UTP signals across while at the same time injects 48v power for the PD (powered device). The supply complies with the IEEE 802.3af and will only apply power to the cable if a compliant device is connected.

For example, you can use the power injector to power the UHBX-S-WP wall plate transmitter if the receiver does not supply power via the UTP cable. Some TV’s and projectors have direct HDBaseT™ inputs (receiver is built in to the display), but may not be able to send power to the wall plate. So, to connect the Wall-plate transmitter to the display, the 511-POH-17W inserter can be utilized.

The inserter has a universal AC input and can be connected to 115~230v AC. The package includes the following:

  • Power supply module
  • North American Power cord (customer must provide their own AC input cables when used with other standards)
  • 6 ft UTP Cable

The inserter can be connected at either end, but it is recommended to locate it at the remote end of the HDBaseT™ extension as shown above.

For more information about our other HDBaseT™ extenders please follow the link below to the Product Selection Chart.

Features

  • Self-contained HDBaseT Power Injector
  • 100-240VAC Universal Input
  • Desktop Style
  • IEEE802.3af Compliant
  • Load Diagnostic LED
  • Overload Shutdown and Short Circuit Protection
  • Regulated Output With Low Ripple
  • Complies with EMI/RFI Regulations
  • CE Compliant, UL Listed

Block Diagram

Specifications

Output Voltage 48v DC
Regulation and Ripple 1% max
Transient Response < 1 ms
Protection Over-current and Short Circuit
Output Power 17 watts max
Input Voltage Range 100-240VAC
Input Protection Internal Fuse
Chassis Black Polycarbonate ABS-94VO
Operating Temperature 32 to 122 °F (0 to 50 °C)
Weight 0.5 lbs (220 g) Excluding Cord
Dimensions 5.25L x 2.15W x 1.45H (inch)
133L x 54.6W x 36.8H (mm)

Downloads

Manuals Versions Last Updated
511-POH-17W Manual
JUNE 24, 2020

Copyright © 2022 Hall Technologies - All Rights Reserved.